[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.0-custom (root@csystems) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #2 SMP Thu Jul 17 09:50:55 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.14.0-custom root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 drm.debug=6
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfd3bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd3c000-0x00000000bff3dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bff3e000-0x00000000ca3e6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca3e7000-0x00000000ca5e6fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000ca5e7000-0x00000000ccd3efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ccd3f000-0x00000000cce7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cce7f000-0x00000000ccefefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cceff000-0x00000000ccefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ccf00000-0x00000000cf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042e5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by Lenovo
[ 0.000000] efi: ACPI=0xccefe000 ACPI 2.0=0xccefe014 SMBIOS=0xccd3e000
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem01: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000059000-0x000000000009c000) (0MB)
[ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009c000-0x000000000009d000) (0MB)
[ 0.000000] efi: mem04: type=4, attr=0xf, range=[0x000000000009d000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem05: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x00000000014fc000) (19MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x00000000014fc000-0x0000000002000000) (11MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000002000000-0x00000000033fc000) (19MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x00000000033fc000-0x0000000034aae000) (790MB)
[ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000034aae000-0x000000003654f000) (26MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x000000003654f000-0x000000008cd0d000) (1383MB)
[ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x000000008cd0d000-0x00000000be1b8000) (788MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000be1b8000-0x00000000be1d8000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000be1d8000-0x00000000bfb51000) (25MB)
[ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x00000000bfb51000-0x00000000bfd25000) (1MB)
[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000bfd25000-0x00000000bfd3c000) (0MB)
[ 0.000000] efi: mem17: type=0, attr=0xf, range=[0x00000000bfd3c000-0x00000000bff3e000) (2MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000bff3e000-0x00000000c11a8000) (18MB)
[ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000c11a8000-0x00000000c11cb000) (0MB)
[ 0.000000] efi: mem20: type=2, attr=0xf, range=[0x00000000c11cb000-0x00000000c11cc000) (0MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000c11cc000-0x00000000c11cf000) (0MB)
[ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000c11cf000-0x00000000c11d1000) (0MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000c11d1000-0x00000000c11d2000) (0MB)
[ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000c11d2000-0x00000000c11d5000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000c11d5000-0x00000000c11da000) (0MB)
[ 0.000000] efi: mem26: type=2, attr=0xf, range=[0x00000000c11da000-0x00000000c11dc000) (0MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000c11dc000-0x00000000c11de000) (0MB)
[ 0.000000] efi: mem28: type=2, attr=0xf, range=[0x00000000c11de000-0x00000000c11df000) (0MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000c11df000-0x00000000c11e2000) (0MB)
[ 0.000000] efi: mem30: type=2, attr=0xf, range=[0x00000000c11e2000-0x00000000c11e3000) (0MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000c11e3000-0x00000000c11e5000) (0MB)
[ 0.000000] efi: mem32: type=2, attr=0xf, range=[0x00000000c11e5000-0x00000000c11e7000) (0MB)
[ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000c11e7000-0x00000000c12b3000) (0MB)
[ 0.000000] efi: mem34: type=1, attr=0xf, range=[0x00000000c12b3000-0x00000000c13e7000) (1MB)
[ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000c13e7000-0x00000000c3101000) (29MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000c3101000-0x00000000c3102000) (0MB)
[ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000c3102000-0x00000000c3104000) (0MB)
[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000c3104000-0x00000000c3105000) (0MB)
[ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000c3105000-0x00000000c3109000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000c3109000-0x00000000c310a000) (0MB)
[ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000c310a000-0x00000000c310b000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000c310b000-0x00000000c310c000) (0MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000c310c000-0x00000000c310d000) (0MB)
[ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000c310d000-0x00000000c310e000) (0MB)
[ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000c310e000-0x00000000c3130000) (0MB)
[ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000c3130000-0x00000000c3173000) (0MB)
[ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000c3173000-0x00000000c3175000) (0MB)
[ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x00000000c3175000-0x00000000c3176000) (0MB)
[ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x00000000c3176000-0x00000000c3178000) (0MB)
[ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x00000000c3178000-0x00000000c317a000) (0MB)
[ 0.000000] efi: mem51: type=7, attr=0xf, range=[0x00000000c317a000-0x00000000c317b000) (0MB)
[ 0.000000] efi: mem52: type=4, attr=0xf, range=[0x00000000c317b000-0x00000000c31ab000) (0MB)
[ 0.000000] efi: mem53: type=7, attr=0xf, range=[0x00000000c31ab000-0x00000000c31b4000) (0MB)
[ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x00000000c31b4000-0x00000000c4d8b000) (27MB)
[ 0.000000] efi: mem55: type=7, attr=0xf, range=[0x00000000c4d8b000-0x00000000c4d9d000) (0MB)
[ 0.000000] efi: mem56: type=4, attr=0xf, range=[0x00000000c4d9d000-0x00000000c63e7000) (22MB)
[ 0.000000] efi: mem57: type=7, attr=0xf, range=[0x00000000c63e7000-0x00000000c9dfd000) (58MB)
[ 0.000000] efi: mem58: type=2, attr=0xf, range=[0x00000000c9dfd000-0x00000000c9e07000) (0MB)
[ 0.000000] efi: mem59: type=3, attr=0xf, range=[0x00000000c9e07000-0x00000000ca3e7000) (5MB)
[ 0.000000] efi: mem60: type=5, attr=0x800000000000000f, range=[0x00000000ca3e7000-0x00000000ca5e7000) (2MB)
[ 0.000000] efi: mem61: type=6, attr=0x800000000000000f, range=[0x00000000ca5e7000-0x00000000cb3c6000) (13MB)
[ 0.000000] efi: mem62: type=0, attr=0xf, range=[0x00000000cb3c6000-0x00000000ccd3f000) (25MB)
[ 0.000000] efi: mem63: type=10, attr=0xf, range=[0x00000000ccd3f000-0x00000000cce7f000) (1MB)
[ 0.000000] efi: mem64: type=9, attr=0xf, range=[0x00000000cce7f000-0x00000000cceff000) (0MB)
[ 0.000000] efi: mem65: type=4, attr=0xf, range=[0x00000000cceff000-0x00000000ccf00000) (0MB)
[ 0.000000] efi: mem66: type=7, attr=0xf, range=[0x0000000100000000-0x000000042e600000) (13030MB)
[ 0.000000] efi: mem67: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem68: type=0, attr=0x0, range=[0x00000000ccf00000-0x00000000cfa00000) (43MB)
[ 0.000000] efi: mem69: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB)
[ 0.000000] efi: mem70: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem71: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem72: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem73: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem74: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem75: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem76: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] efi: mem77: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20ANCTO1WW/20ANCTO1WW, BIOS GLET70WW (2.24 ) 05/21/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x42e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 2 base 00CE000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 00CD000000 mask 7FFF000000 uncachable
[ 0.000000] 4 base 00CCF00000 mask 7FFFF00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xccf00 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02fda000, 0x02fdafff] PGTABLE
[ 0.000000] BRK [0x02fdb000, 0x02fdbfff] PGTABLE
[ 0.000000] BRK [0x02fdc000, 0x02fdcfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x42e400000-0x42e5fffff]
[ 0.000000] [mem 0x42e400000-0x42e5fffff] page 2M
[ 0.000000] BRK [0x02fdd000, 0x02fddfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x42c000000-0x42e3fffff]
[ 0.000000] [mem 0x42c000000-0x42e3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x42bffffff]
[ 0.000000] [mem 0x400000000-0x42bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfd3bfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbfbfffff] page 2M
[ 0.000000] [mem 0xbfc00000-0xbfd3bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbff3e000-0xca3e6fff]
[ 0.000000] [mem 0xbff3e000-0xbfffffff] page 4k
[ 0.000000] [mem 0xc0000000-0xca1fffff] page 2M
[ 0.000000] [mem 0xca200000-0xca3e6fff] page 4k
[ 0.000000] BRK [0x02fde000, 0x02fdefff] PGTABLE
[ 0.000000] BRK [0x02fdf000, 0x02fdffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcceff000-0xccefffff]
[ 0.000000] [mem 0xcceff000-0xccefffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x34aae000-0x3654efff]
[ 0.000000] ACPI: RSDP 00000000ccefe014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000ccefe170 0000DC (v01 LENOVO TP-GL 00002240 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000ccef9000 00010C (v05 LENOVO TP-GL 00002240 PTEC 00000002)
[ 0.000000] ACPI: DSDT 00000000ccee2000 011882 (v01 LENOVO TP-GL 00002240 INTL 20120711)
[ 0.000000] ACPI: FACS 00000000cce4a000 000040
[ 0.000000] ACPI: DBGP 00000000ccefc000 000034 (v01 LENOVO TP-GL 00002240 PTEC 00000002)
[ 0.000000] ACPI: ECDT 00000000ccefb000 000052 (v01 LENOVO TP-GL 00002240 PTEC 00000002)
[ 0.000000] ACPI: HPET 00000000ccef8000 000038 (v01 LENOVO TP-GL 00002240 PTEC 00000002)
[ 0.000000] ACPI: APIC 00000000ccef7000 000098 (v01 LENOVO TP-GL 00002240 PTEC 00000002)
[ 0.000000] ACPI: MCFG 00000000ccef6000 00003C (v01 LENOVO TP-GL 00002240 PTEC 00000002)
[ 0.000000] ACPI: SSDT 00000000ccef5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000ccef4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000ccee1000 000B75 (v01 LENOVO SataAhci 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000ccee0000 00076F (v01 LENOVO Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000ccedf000 000AD8 (v01 LENOVO CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000ccedd000 00125C (v01 LENOVO SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 00000000ccedc000 000379 (v01 LENOVO CppcTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: PCCT 00000000ccedb000 00006E (v05 LENOVO TP-GL 00002240 PTEC 00000002)
[ 0.000000] ACPI: SSDT 00000000cceda000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
[ 0.000000] ACPI: TCPA 00000000cced9000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: UEFI 00000000cced8000 000042 (v01 LENOVO TP-GL 00002240 PTEC 00000002)
[ 0.000000] ACPI: MSDM 00000000ccdb2000 000055 (v03 LENOVO TP-GL 00002240 PTEC 00000002)
[ 0.000000] ACPI: ASF! 00000000ccefd000 0000A5 (v32 LENOVO TP-GL 00002240 PTEC 00000002)
[ 0.000000] ACPI: BATB 00000000cced7000 000046 (v01 LENOVO TP-GL 00002240 PTEC 00000002)
[ 0.000000] ACPI: FPDT 00000000cced6000 000064 (v01 LENOVO TP-GL 00002240 PTEC 00000002)
[ 0.000000] ACPI: UEFI 00000000cced5000 0002E2 (v01 LENOVO TP-GL 00002240 PTEC 00000002)
[ 0.000000] ACPI: BGRT 00000000cced4000 000038 (v01 LENOVO TP-GL 00002240 PTEC 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x42e5fffff]
[ 0.000000] NODE_DATA [mem 0x42e5f7000-0x42e5fbfff]
[ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041dc00000-ffff88042dbfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x42e5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00057fff]
[ 0.000000] node 0: [mem 0x00059000-0x0009bfff]
[ 0.000000] node 0: [mem 0x0009d000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbfd3bfff]
[ 0.000000] node 0: [mem 0xbff3e000-0xca3e6fff]
[ 0.000000] node 0: [mem 0xcceff000-0xccefffff]
[ 0.000000] node 0: [mem 0x100000000-0x42e5fffff]
[ 0.000000] On node 0 totalpages: 4163457
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12872 pages used for memmap
[ 0.000000] DMA32 zone: 823782 pages, LIFO batch:31
[ 0.000000] Normal zone: 52120 pages used for memmap
[ 0.000000] Normal zone: 3335680 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfd3c000-0xbff3dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca3e7000-0xca5e6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca5e7000-0xccd3efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccd3f000-0xcce7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcce7f000-0xccefefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xccf00000-0xcf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xf80f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[ 0.000000] e820: [mem 0xcfa00000-0xf80f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88042e200000 s86592 r8192 d24000 u262144
[ 0.000000] pcpu-alloc: s86592 r8192 d24000 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4098378
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.14.0-custom root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 drm.debug=6
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16203876K/16653828K available (7388K kernel code, 1118K rwdata, 3504K rodata, 1340K init, 1444K bss, 449952K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.435 MHz processor
[ 0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.87 BogoMIPS (lpj=9977740)
[ 0.000029] pid_max: default: 32768 minimum: 301
[ 0.000035] ACPI: Core revision 20131218
[ 0.008680] ACPI: All ACPI Tables successfully acquired
[ 0.035190] Security Framework initialized
[ 0.035203] AppArmor: AppArmor initialized
[ 0.035203] Yama: becoming mindful.
[ 0.036178] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.038981] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.040177] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.040194] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.040389] Initializing cgroup subsys memory
[ 0.040393] Initializing cgroup subsys devices
[ 0.040394] Initializing cgroup subsys freezer
[ 0.040396] Initializing cgroup subsys net_cls
[ 0.040397] Initializing cgroup subsys blkio
[ 0.040398] Initializing cgroup subsys perf_event
[ 0.040400] Initializing cgroup subsys hugetlb
[ 0.040421] CPU: Physical Processor ID: 0
[ 0.040422] CPU: Processor Core ID: 0
[ 0.040426] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.040426] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.041303] mce: CPU supports 7 MCE banks
[ 0.041315] CPU0: Thermal monitoring enabled (TM1)
[ 0.041324] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.041324] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.041324] tlb_flushall_shift: 6
[ 0.041419] Freeing SMP alternatives memory: 28K (ffffffff81e68000 - ffffffff81e6f000)
[ 0.044603] ftrace: allocating 28549 entries in 112 pages
[ 0.055863] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.095595] smpboot: CPU0: Intel(R) Core(TM) i5-4200M CPU @ 2.50GHz (fam: 06, model: 3c, stepping: 03)
[ 0.095602] TSC deadline timer enabled
[ 0.097285] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.097292] ... version: 3
[ 0.097292] ... bit width: 48
[ 0.097293] ... generic registers: 4
[ 0.097294] ... value mask: 0000ffffffffffff
[ 0.097295] ... max period: 0000ffffffffffff
[ 0.097296] ... fixed-purpose events: 3
[ 0.097297] ... event mask: 000000070000000f
[ 0.098666] x86: Booting SMP configuration:
[ 0.098667] .... node #0, CPUs: #1
[ 0.112793] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.112864] #2 #3
[ 0.140942] x86: Booted up 1 node, 4 CPUs
[ 0.140945] smpboot: Total of 4 processors activated (19955.48 BogoMIPS)
[ 0.144341] devtmpfs: initialized
[ 0.146978] EVM: security.selinux
[ 0.146979] EVM: security.SMACK64
[ 0.146980] EVM: security.ima
[ 0.146981] EVM: security.capability
[ 0.147024] PM: Registering ACPI NVS region [mem 0xccd3f000-0xcce7efff] (1310720 bytes)
[ 0.147663] pinctrl core: initialized pinctrl subsystem
[ 0.147717] regulator-dummy: no parameters
[ 0.147745] RTC time: 12:21:36, date: 07/17/14
[ 0.147771] NET: Registered protocol family 16
[ 0.147868] cpuidle: using governor ladder
[ 0.147869] cpuidle: using governor menu
[ 0.147906] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.147907] ACPI: bus type PCI registered
[ 0.147908] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.148064] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.148066] PCI: not using MMCONFIG
[ 0.148067] PCI: Using configuration type 1 for base access
[ 0.149142] bio: create slab <bio-0> at 0
[ 0.149258] ACPI: Added _OSI(Module Device)
[ 0.149259] ACPI: Added _OSI(Processor Device)
[ 0.149260] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.149262] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.151263] ACPI : EC: EC description table is found, configuring boot EC
[ 0.156785] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.165054] ACPI: SSDT 00000000ccd2d918 000436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.165559] ACPI: Dynamic OEM Table Load:
[ 0.165561] ACPI: SSDT (null) 000436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.169164] ACPI: SSDT 00000000ccd2e618 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.169732] ACPI: Dynamic OEM Table Load:
[ 0.169734] ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.173050] ACPI: SSDT 00000000ccd2fc18 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.173554] ACPI: Dynamic OEM Table Load:
[ 0.173555] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.177493] ACPI: Interpreter enabled
[ 0.177498] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[ 0.177503] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[ 0.177515] ACPI: (supports S0 S3 S4 S5)
[ 0.177516] ACPI: Using IOAPIC for interrupt routing
[ 0.177529] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.181235] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.187686] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.188002] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.190462] ACPI: Power Resource [PUBS] (on)
[ 0.190964] ACPI: Power Resource [NVP3] (on)
[ 0.190985] ACPI: Power Resource [NVP2] (on)
[ 0.195296] ACPI: \_PR_.CPU4: failed to get CPU APIC ID.
[ 0.195299] ACPI: \_PR_.CPU5: failed to get CPU APIC ID.
[ 0.195302] ACPI: \_PR_.CPU6: failed to get CPU APIC ID.
[ 0.195305] ACPI: \_PR_.CPU7: failed to get CPU APIC ID.
[ 0.195348] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.195395] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.195441] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.195486] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.195530] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.195574] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.195619] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.195663] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.195688] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.195692] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.195776] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.195813] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.195815] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.195816] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.195818] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.195975] PCI host bridge to bus 0000:00
[ 0.195977] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.195978] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.195980] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.195981] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.195982] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.195984] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.195985] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.195986] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.195987] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.195988] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.195990] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.195991] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.195992] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.195994] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.195996] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.195997] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.195998] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfebfffff]
[ 0.195999] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
[ 0.196006] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.196077] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.196088] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[ 0.196094] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.196098] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.196162] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.196169] pci 0000:00:03.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit]
[ 0.196262] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.196281] pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit]
[ 0.196339] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.196367] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.196402] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.196421] pci 0000:00:16.0: reg 0x10: [mem 0xe0639000-0xe063900f 64bit]
[ 0.196483] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.196546] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
[ 0.196563] pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff]
[ 0.196571] pci 0000:00:19.0: reg 0x14: [mem 0xe063f000-0xe063ffff]
[ 0.196580] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
[ 0.196638] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.196666] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.196700] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.196720] pci 0000:00:1a.0: reg 0x10: [mem 0xe063e000-0xe063e3ff]
[ 0.196805] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.196834] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.196869] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.196883] pci 0000:00:1b.0: reg 0x10: [mem 0xe0634000-0xe0637fff 64bit]
[ 0.196949] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.197010] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.197075] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.197132] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.197196] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.197226] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.197266] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.197287] pci 0000:00:1d.0: reg 0x10: [mem 0xe063d000-0xe063d3ff]
[ 0.197371] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.197401] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.197434] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
[ 0.197581] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.197597] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
[ 0.197605] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7]
[ 0.197613] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
[ 0.197620] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3]
[ 0.197627] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.197635] pci 0000:00:1f.2: reg 0x24: [mem 0xe063c000-0xe063c7ff]
[ 0.197671] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.197722] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.197737] pci 0000:00:1f.3: reg 0x10: [mem 0xe0638000-0xe06380ff 64bit]
[ 0.197755] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.197934] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[ 0.197999] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0500fff]
[ 0.198269] pci 0000:02:00.0: supports D1 D2
[ 0.198270] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.209053] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.209059] pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
[ 0.209170] pci 0000:03:00.0: [8086:088f] type 00 class 0x028000
[ 0.209243] pci 0000:03:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit]
[ 0.209488] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.221084] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.221090] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.221525] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.221580] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.221664] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=mem,locks=none
[ 0.221667] vgaarb: loaded
[ 0.221668] vgaarb: bridge control possible 0000:00:02.0
[ 0.221806] SCSI subsystem initialized
[ 0.221843] libata version 3.00 loaded.
[ 0.221859] ACPI: bus type USB registered
[ 0.221874] usbcore: registered new interface driver usbfs
[ 0.221880] usbcore: registered new interface driver hub
[ 0.221899] usbcore: registered new device driver usb
[ 0.222000] PCI: Using ACPI for IRQ routing
[ 0.223325] PCI: pci_cache_line_size set to 64 bytes
[ 0.223423] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.223425] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[ 0.223426] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.223427] e820: reserve RAM buffer [mem 0xbfd3c000-0xbfffffff]
[ 0.223428] e820: reserve RAM buffer [mem 0xca3e7000-0xcbffffff]
[ 0.223429] e820: reserve RAM buffer [mem 0xccf00000-0xcfffffff]
[ 0.223430] e820: reserve RAM buffer [mem 0x42e600000-0x42fffffff]
[ 0.223501] NetLabel: Initializing
[ 0.223502] NetLabel: domain hash size = 128
[ 0.223503] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.223512] NetLabel: unlabeled traffic allowed by default
[ 0.223559] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.223564] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.225596] Switched to clocksource hpet
[ 0.230274] AppArmor: AppArmor Filesystem Enabled
[ 0.230296] pnp: PnP ACPI init
[ 0.230310] ACPI: bus type PNP registered
[ 0.230576] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.230578] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.230580] system 00:00: [mem 0x00100000-0xcf9fffff] could not be reserved
[ 0.230582] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.230583] system 00:00: [mem 0xfed4c000-0xffffffff] has been reserved
[ 0.230586] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.230669] system 00:01: [io 0x1800-0x187f] could not be reserved
[ 0.230671] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.230673] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.230674] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.230676] system 00:01: [io 0x1640-0x165f] has been reserved
[ 0.230678] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.230679] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.230681] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.230682] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.230684] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.230685] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.230687] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.230689] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230736] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.230742] pnp 00:03: [dma 4]
[ 0.230757] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.230776] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.230801] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.230823] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.230844] pnp 00:07: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[ 0.230865] pnp 00:08: Plug and Play ACPI device, IDs LEN0039 PNP0f13 (active)
[ 0.230900] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.231170] pnp: PnP ACPI: found 10 devices
[ 0.231172] ACPI: bus type PNP unregistered
[ 0.237318] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.237325] pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
[ 0.237334] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.237338] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.237347] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.237348] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.237350] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.237351] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.237352] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.237353] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.237355] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.237356] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.237357] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.237358] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.237360] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.237361] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.237362] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.237363] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.237365] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.237366] pci_bus 0000:00: resource 19 [mem 0xcfa00000-0xfebfffff]
[ 0.237367] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed4bfff]
[ 0.237369] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
[ 0.237370] pci_bus 0000:03: resource 1 [mem 0xe0400000-0xe04fffff]
[ 0.237393] NET: Registered protocol family 2
[ 0.237553] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.237743] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.237850] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.237865] TCP: reno registered
[ 0.237882] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.237926] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.237998] NET: Registered protocol family 1
[ 0.238007] pci 0000:00:02.0: Boot video device
[ 0.238391] PCI: CLS 64 bytes, default 64
[ 0.238436] Trying to unpack rootfs image as initramfs...
[ 0.632258] Freeing initrd memory: 27268K (ffff880034aae000 - ffff88003654f000)
[ 0.632262] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.632265] software IO TLB [mem 0xba1b8000-0xbe1b8000] (64MB) mapped at [ffff8800ba1b8000-ffff8800be1b7fff]
[ 0.632426] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
[ 0.632464] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x19
[ 0.632469] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x19
[ 0.632476] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x19
[ 0.632483] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x19
[ 0.632529] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.632542] Scanning for low memory corruption every 60 seconds
[ 0.632805] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.632819] Initialise system trusted keyring
[ 0.632856] audit: initializing netlink subsys (disabled)
[ 0.632868] audit: type=2000 audit(1405599696.628:1): initialized
[ 0.656182] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.657273] zbud: loaded
[ 0.657390] VFS: Disk quotas dquot_6.5.2
[ 0.657425] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.657805] fuse init (API version 7.22)
[ 0.657871] msgmni has been set to 31851
[ 0.657914] Key type big_key registered
[ 0.658224] Key type asymmetric registered
[ 0.658226] Asymmetric key parser 'x509' registered
[ 0.658253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.658278] io scheduler noop registered
[ 0.658280] io scheduler deadline registered (default)
[ 0.658303] io scheduler cfq registered
[ 0.658554] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.658565] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.658602] efifb: probing for efifb
[ 0.659245] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90005c00000, using 5632k, total 5632k
[ 0.659247] efifb: mode is 1600x900x32, linelength=6400, pages=1
[ 0.659247] efifb: scrolling: redraw
[ 0.659249] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.662122] Console: switching to colour frame buffer device 200x56
[ 0.664913] fb0: EFI VGA frame buffer device
[ 0.664923] intel_idle: MWAIT substates: 0x42120
[ 0.664925] intel_idle: v0.4 model 0x3C
[ 0.664926] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.665054] ipmi message handler version 39.2
[ 0.665268] ACPI: AC Adapter [AC] (on-line)
[ 0.665330] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.665529] ACPI: Lid Switch [LID]
[ 0.665561] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.665564] ACPI: Sleep Button [SLPB]
[ 0.665606] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.665608] ACPI: Power Button [PWRF]
[ 0.666611] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.666613] ACPI: Thermal Zone [THM0] (59 C)
[ 0.666647] GHES: HEST is not enabled!
[ 0.666715] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.668272] Linux agpgart interface v0.103
[ 0.668855] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
[ 0.673722] ACPI: Battery Slot [BAT0] (battery present)
[ 0.714186] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[ 0.715287] brd: module loaded
[ 0.715856] loop: module loaded
[ 0.716153] libphy: Fixed MDIO Bus: probed
[ 0.716225] tun: Universal TUN/TAP device driver, 1.6
[ 0.716226] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.716266] PPP generic driver version 2.4.2
[ 0.716296] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.716299] ehci-pci: EHCI PCI platform driver
[ 0.716382] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.716387] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.716398] ehci-pci 0000:00:1a.0: debug port 2
[ 0.720319] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.720338] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe063e000
[ 0.730162] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.730197] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.730198] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.730199] usb usb1: Product: EHCI Host Controller
[ 0.730201] usb usb1: Manufacturer: Linux 3.14.0-custom ehci_hcd
[ 0.730202] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.730296] hub 1-0:1.0: USB hub found
[ 0.730301] hub 1-0:1.0: 3 ports detected
[ 0.730470] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.730474] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.730484] ehci-pci 0000:00:1d.0: debug port 2
[ 0.734402] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.734421] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe063d000
[ 0.746179] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.746206] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.746208] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.746209] usb usb2: Product: EHCI Host Controller
[ 0.746210] usb usb2: Manufacturer: Linux 3.14.0-custom ehci_hcd
[ 0.746211] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.746317] hub 2-0:1.0: USB hub found
[ 0.746322] hub 2-0:1.0: 3 ports detected
[ 0.746420] ehci-platform: EHCI generic platform driver
[ 0.746427] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.746430] ohci-pci: OHCI PCI platform driver
[ 0.746437] ohci-platform: OHCI generic platform driver
[ 0.746442] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.746528] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.746532] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.746617] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.746633] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
[ 0.746682] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.746684] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.746685] usb usb3: Product: xHCI Host Controller
[ 0.746686] usb usb3: Manufacturer: Linux 3.14.0-custom xhci_hcd
[ 0.746687] usb usb3: SerialNumber: 0000:00:14.0
[ 0.746784] hub 3-0:1.0: USB hub found
[ 0.746800] hub 3-0:1.0: 15 ports detected
[ 0.748897] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.748900] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.748936] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.748938] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.748939] usb usb4: Product: xHCI Host Controller
[ 0.748940] usb usb4: Manufacturer: Linux 3.14.0-custom xhci_hcd
[ 0.748941] usb usb4: SerialNumber: 0000:00:14.0
[ 0.749041] hub 4-0:1.0: USB hub found
[ 0.749053] hub 4-0:1.0: 6 ports detected
[ 0.750017] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.751843] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.751847] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.751959] mousedev: PS/2 mouse device common for all mice
[ 0.752129] rtc_cmos 00:06: RTC can wake from S4
[ 0.752265] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.752298] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.752351] device-mapper: uevent: version 1.0.3
[ 0.752422] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.752427] Intel P-state driver initializing.
[ 0.752435] Intel pstate controlling: cpu 0
[ 0.752451] Intel pstate controlling: cpu 1
[ 0.752470] Intel pstate controlling: cpu 2
[ 0.752479] Intel pstate controlling: cpu 3
[ 0.752498] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.752499] EFI Variables Facility v0.08 2004-May-17
[ 0.753775] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.761771] TCP: cubic registered
[ 0.761843] NET: Registered protocol family 10
[ 0.762012] NET: Registered protocol family 17
[ 0.762019] Key type dns_resolver registered
[ 0.762215] Loading compiled-in X.509 certificates
[ 0.762799] Loaded X.509 cert 'Magrathea: Glacier signing key: 2543ba48326a5ed455402c8ca137278086d77ee1'
[ 0.762806] registered taskstats version 1
[ 0.764308] Key type trusted registered
[ 0.765693] Key type encrypted registered
[ 0.767055] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.778270] tpm_tis 00:09: A TPM error (6) occurred attempting to read a pcr value
[ 0.778300] IMA: No TPM chip found, activating TPM-bypass!
[ 0.778649] regulator-dummy: disabling
[ 0.778739] Magic number: 6:378:380
[ 0.778837] rtc_cmos 00:06: setting system clock to 2014-07-17 12:21:37 UTC (1405599697)
[ 0.778934] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.778936] EDD information not available.
[ 0.778986] PM: Hibernation image not present or could not be loaded.
[ 0.779631] Freeing unused kernel memory: 1340K (ffffffff81d19000 - ffffffff81e68000)
[ 0.779632] Write protecting the kernel read-only data: 12288k
[ 0.781150] Freeing unused kernel memory: 792K (ffff88000273a000 - ffff880002800000)
[ 0.782193] Freeing unused kernel memory: 592K (ffff880002b6c000 - ffff880002c00000)
[ 0.793795] systemd-udevd[123]: starting version 204
[ 0.804892] video: module verification failed: signature and/or required key missing - tainting kernel
[ 0.805843] wmi: Mapper loaded
[ 0.811093] drm: module has bad taint, not creating trace events
[ 0.811172] [drm] Initialized drm 1.1.0 20060810
[ 0.811295] pps_core: LinuxPPS API ver. 1 registered
[ 0.811297] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.811472] PTP clock support registered
[ 0.812018] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.812021] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 0.812158] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.812176] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 0.814174] i915: module has bad taint, not creating trace events
[ 0.814987] rtsx_pci 0000:02:00.0: irq 42 for MSI/MSI-X
[ 0.815018] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
[ 0.822806] AVX2 version of gcm_enc/dec engaged.
[ 0.979657] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.979660] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:8f:f7:a3
[ 0.979661] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.979690] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[ 0.979731] i915 0000:00:02.0: enabling device (0006 -> 0007)
[ 0.980058] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0416 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
[ 0.980311] [drm:intel_detect_pch], Found LynxPoint PCH
[ 0.980551] [drm] Memory usable by graphics device = 2048M
[ 0.980553] [drm:i915_gem_gtt_init], GMADR size = 256M
[ 0.980553] [drm:i915_gem_gtt_init], GTT stolen size = 32M
[ 0.980555] checking generic (d0000000 580000) vs hw (d0000000 10000000)
[ 0.980556] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 0.980575] Console: switching to colour dummy device 80x25
[ 0.982684] usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.000172] usb 4-5: New USB device found, idVendor=17ef, idProduct=1010
[ 1.000174] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.000176] usb 4-5: Product: Lenovo ThinkPad Dock
[ 1.000177] usb 4-5: Manufacturer: LENOVO
[ 1.002588] hub 4-5:1.0: USB hub found
[ 1.002697] hub 4-5:1.0: 4 ports detected
[ 1.005567] [drm:intel_opregion_setup], graphic opregion physical addr: 0xcce45018
[ 1.005574] [drm:intel_opregion_setup], Public ACPI methods supported
[ 1.005575] [drm:intel_opregion_setup], SWSCI supported
[ 1.026525] [drm:swsci_setup], SWSCI BIOS requested (00200383) SBCB callbacks that are not supported (02200705)
[ 1.026529] [drm:swsci_setup], SWSCI GBDA callbacks 00000483, SBCB callbacks 00200383
[ 1.026531] [drm:intel_opregion_setup], ASLE supported
[ 1.026585] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 1.026591] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.026592] [drm] Driver supports precise vblank timestamp query.
[ 1.026594] [drm:init_vbt_defaults], Set default to SSC at 120000 kHz
[ 1.026596] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT HASWELL d
[ 1.026598] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 1.026599] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 1.026602] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 1.026605] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[ 1.026606] [drm:parse_lfp_panel_data], VBT initial LVDS value 300
[ 1.026608] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 220 Hz, active high, min brightness 3, level 255
[ 1.026609] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 1.026611] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 1.026612] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 1.026614] [drm:parse_mipi], No MIPI BDB found
[ 1.026616] [drm:parse_ddi_port], Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
[ 1.026617] [drm:parse_ddi_port], VBT HDMI level shift for port A: 0
[ 1.026618] [drm:parse_ddi_port], Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
[ 1.026619] [drm:parse_ddi_port], VBT HDMI level shift for port B: 1
[ 1.026621] [drm:parse_ddi_port], Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
[ 1.026622] [drm:parse_ddi_port], VBT HDMI level shift for port C: 1
[ 1.026623] [drm:parse_ddi_port], Port D VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
[ 1.026624] [drm:parse_ddi_port], VBT HDMI level shift for port D: 1
[ 1.026634] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 1.026639] [drm:i915_gem_init_stolen], found 33554432 bytes of stolen memory at cda00000
[ 1.026670] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=mem
[ 1.026678] [drm:intel_print_wm_latency], Primary WM0 latency 20 (2.0 usec)
[ 1.026679] [drm:intel_print_wm_latency], Primary WM1 latency 4 (2.0 usec)
[ 1.026680] [drm:intel_print_wm_latency], Primary WM2 latency 36 (18.0 usec)
[ 1.026681] [drm:intel_print_wm_latency], Primary WM3 latency 90 (45.0 usec)
[ 1.026682] [drm:intel_print_wm_latency], Primary WM4 latency 160 (80.0 usec)
[ 1.026683] [drm:intel_print_wm_latency], Sprite WM0 latency 20 (2.0 usec)
[ 1.026684] [drm:intel_print_wm_latency], Sprite WM1 latency 4 (2.0 usec)
[ 1.026686] [drm:intel_print_wm_latency], Sprite WM2 latency 36 (18.0 usec)
[ 1.026687] [drm:intel_print_wm_latency], Sprite WM3 latency 90 (45.0 usec)
[ 1.026688] [drm:intel_print_wm_latency], Sprite WM4 latency 160 (80.0 usec)
[ 1.026689] [drm:intel_print_wm_latency], Cursor WM0 latency 20 (2.0 usec)
[ 1.026690] [drm:intel_print_wm_latency], Cursor WM1 latency 4 (2.0 usec)
[ 1.026691] [drm:intel_print_wm_latency], Cursor WM2 latency 36 (18.0 usec)
[ 1.026692] [drm:intel_print_wm_latency], Cursor WM3 latency 90 (45.0 usec)
[ 1.026693] [drm:intel_print_wm_latency], Cursor WM4 latency 160 (80.0 usec)
[ 1.026695] [drm:intel_modeset_init], 3 display pipes available.
[ 1.026706] [drm:intel_ddi_pll_init], CDCLK running at 540000KHz
[ 1.027051] [drm:intel_dp_init_connector], Adding eDP connector on port A
[ 1.027077] [drm:intel_dp_aux_init], registering DPDDC-A bus for card0-eDP-1
[ 1.027133] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
[ 1.027136] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[ 1.027138] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600
[ 1.027140] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200
[ 1.027144] [drm:_ironlake_edp_panel_vdd_on], Turning eDP VDD on
[ 1.027152] [drm:_ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[ 1.027456] [drm:intel_dp_get_dpcd], DPCD: 11 0a 81 41 00 00 01 00 02 02 06 00 00 0b 00
[ 1.027641] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x7d0000a, PP_OFF 0x1f407d0, PP_DIV 0x186906
[ 1.048089] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 1.048120] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 4438/4438, sysfs interface registered
[ 1.048127] [drm:intel_dp_init_connector], Adding DP connector on port B
[ 1.048154] [drm:intel_dp_aux_init], registering DPDDC-B bus for card0-DP-1
[ 1.048212] [drm:intel_dp_init_connector], Adding DP connector on port C
[ 1.048232] [drm:intel_dp_aux_init], registering DPDDC-C bus for card0-DP-2
[ 1.114681] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.247125] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.247129] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.247399] hub 1-1:1.0: USB hub found
[ 1.247467] hub 1-1:1.0: 6 ports detected
[ 1.294309] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00, board id: 2939, fw id: 1586425
[ 1.294315] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 1.294860] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000]
[ 1.296584] [drm:init_status_page], render ring hws offset: 0x00000000
[ 1.302836] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
[ 1.302846] [drm:init_status_page], bsd ring hws offset: 0x00022000
[ 1.302928] [drm:init_status_page], blitter ring hws offset: 0x00043000
[ 1.302995] [drm:init_status_page], video enhancement ring hws offset: 0x00064000
[ 1.303084] [drm:create_default_context], Default HW context loaded
[ 1.303085] [drm:i915_gem_context_init], HW context support initialized
[ 1.303186] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
[ 1.303192] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled
[ 1.303193] [drm:intel_modeset_readout_hw_state], [CRTC:6] hw state readout: disabled
[ 1.303195] [drm:intel_modeset_readout_hw_state], [CRTC:8] hw state readout: disabled
[ 1.303197] [drm:intel_ddi_get_crtc_pll], Pipe A connected to port A using clock 0x60000000
[ 1.303199] [drm:intel_modeset_readout_hw_state], [ENCODER:11:DAC-11] hw state readout: disabled, pipe A
[ 1.303203] [drm:intel_modeset_readout_hw_state], [ENCODER:12:TMDS-12] hw state readout: enabled, pipe A
[ 1.303204] [drm:intel_modeset_readout_hw_state], [ENCODER:20:TMDS-20] hw state readout: disabled, pipe A
[ 1.303206] [drm:intel_modeset_readout_hw_state], [ENCODER:22:DP MST-22] hw state readout: disabled, pipe A
[ 1.303207] [drm:intel_modeset_readout_hw_state], [ENCODER:23:DP MST-23] hw state readout: disabled, pipe B
[ 1.303208] [drm:intel_modeset_readout_hw_state], [ENCODER:24:DP MST-24] hw state readout: disabled, pipe C
[ 1.303210] [drm:intel_modeset_readout_hw_state], [ENCODER:26:TMDS-26] hw state readout: disabled, pipe A
[ 1.303211] [drm:intel_modeset_readout_hw_state], [ENCODER:28:DP MST-28] hw state readout: disabled, pipe A
[ 1.303212] [drm:intel_modeset_readout_hw_state], [ENCODER:29:DP MST-29] hw state readout: disabled, pipe B
[ 1.303213] [drm:intel_modeset_readout_hw_state], [ENCODER:30:DP MST-30] hw state readout: disabled, pipe C
[ 1.303215] [drm:intel_modeset_readout_hw_state], [CONNECTOR:13:eDP-1] hw state readout: enabled
[ 1.303217] [drm:intel_modeset_readout_hw_state], [CONNECTOR:10:VGA-1] hw state readout: disabled
[ 1.303219] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:DP-1] hw state readout: disabled
[ 1.303220] [drm:intel_modeset_readout_hw_state], [CONNECTOR:25:HDMI-A-1] hw state readout: disabled
[ 1.303221] [drm:intel_modeset_readout_hw_state], [CONNECTOR:27:DP-2] hw state readout: disabled
[ 1.303223] [drm:intel_modeset_readout_hw_state], [CONNECTOR:31:HDMI-A-2] hw state readout: disabled
[ 1.303225] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe A
[ 1.303226] [drm:intel_dump_pipe_config], cpu_transcoder: P
[ 1.303227] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 0
[ 1.303229] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.303230] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 7871310, gmch_n: 8388608, link_m: 218647, link_n: 524288, tu: 64
[ 1.303231] [drm:intel_dump_pipe_config], requested mode:
[ 1.303233] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1600 0 0 0 900 0 0 0 0x0 0x0
[ 1.303234] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.303236] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 1.303237] [drm:intel_dump_crtc_timings], crtc timings: 0 1600 1664 1706 1954 900 903 906 960, type: 0x0 flags: 0xa
[ 1.303239] [drm:intel_dump_pipe_config], port clock: 0
[ 1.303240] [drm:intel_dump_pipe_config], pipe src size: 1600x900
[ 1.303241] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.303242] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.303243] [drm:intel_dump_pipe_config], ips: 0
[ 1.303244] [drm:intel_dump_pipe_config], double wide: 0
[ 1.303246] [drm:intel_dump_pipe_config], [CRTC:6][setup_hw_state] config for pipe B
[ 1.303247] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1.303248] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 1.303249] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.303250] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.303251] [drm:intel_dump_pipe_config], requested mode:
[ 1.303252] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.303253] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.303255] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.303256] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 1.303257] [drm:intel_dump_pipe_config], port clock: 0
[ 1.303258] [drm:intel_dump_pipe_config], pipe src size: 0x0
[ 1.303259] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.303260] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.303261] [drm:intel_dump_pipe_config], ips: 0
[ 1.303262] [drm:intel_dump_pipe_config], double wide: 0
[ 1.303264] [drm:intel_dump_pipe_config], [CRTC:8][setup_hw_state] config for pipe C
[ 1.303265] [drm:intel_dump_pipe_config], cpu_transcoder: C
[ 1.303265] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 1.303267] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.303268] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.303269] [drm:intel_dump_pipe_config], requested mode:
[ 1.303270] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.303271] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.303273] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.303274] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 1.303275] [drm:intel_dump_pipe_config], port clock: 0
[ 1.303276] [drm:intel_dump_pipe_config], pipe src size: 0x0
[ 1.303277] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.303278] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.303279] [drm:intel_dump_pipe_config], ips: 0
[ 1.303280] [drm:intel_dump_pipe_config], double wide: 0
[ 1.303284] [drm:intel_connector_check_state], [CONNECTOR:13:eDP-1]
[ 1.303287] [drm:check_encoder_state], [ENCODER:11:DAC-11]
[ 1.303288] [drm:check_encoder_state], [ENCODER:12:TMDS-12]
[ 1.303289] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
[ 1.303291] [drm:check_encoder_state], [ENCODER:22:DP MST-22]
[ 1.303292] [drm:check_encoder_state], [ENCODER:23:DP MST-23]
[ 1.303293] [drm:check_encoder_state], [ENCODER:24:DP MST-24]
[ 1.303294] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
[ 1.303295] [drm:check_encoder_state], [ENCODER:28:DP MST-28]
[ 1.303296] [drm:check_encoder_state], [ENCODER:29:DP MST-29]
[ 1.303297] [drm:check_encoder_state], [ENCODER:30:DP MST-30]
[ 1.303298] [drm:check_crtc_state], [CRTC:4]
[ 1.303302] [drm:check_crtc_state], [CRTC:6]
[ 1.303304] [drm:check_crtc_state], [CRTC:8]
[ 1.303320] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1]
[ 1.303321] [drm:intel_dp_detect], [CONNECTOR:13:eDP-1]
[ 1.303329] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 1.303331] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1] probed modes :
[ 1.303333] [drm:drm_mode_debug_printmodeline], Modeline 14:"1600x900" 60 112600 1600 1664 1706 1954 900 903 906 960 0x48 0xa
[ 1.303335] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1]
[ 1.303336] [drm:intel_crt_detect], [CONNECTOR:10:VGA-1] force=1
[ 1.303343] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
[ 1.318886] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 1.318890] [drm:intel_crt_detect], CRT not detected via hotplug
[ 1.319140] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 1.319145] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 1.319147] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 1.319148] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 1.319665] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 1.319666] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 1.319667] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 1.319670] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1] disconnected
[ 1.319672] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 1.319674] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[ 1.319676] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 1.319678] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1]
[ 1.319679] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-1]
[ 1.333358] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 1.358933] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.374926] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 1.390910] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 1.390913] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1] disconnected
[ 1.390915] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 1.390917] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[ 1.391258] [drm:intel_dp_get_dpcd], DPCD: 12 14 c4 01 00 15 01 83 02 00 00 00 00 00 04
[ 1.391261] [drm:intel_dp_get_dpcd], Displayport TPS3 supported
[ 1.391971] [drm:intel_dp_probe_oui], Sink OUI: 000000
[ 1.392173] [drm:intel_dp_probe_oui], Branch OUI: 90cc24
[ 1.392344] [drm:intel_dp_probe_mst], Sink is MST capable
[ 1.394232] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 1.394234] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2]
[ 1.394236] [drm:intel_hdmi_detect], [CONNECTOR:31:HDMI-A-2]
[ 1.394410] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 1.394411] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 1.394413] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2] disconnected
[ 1.394414] [drm:drm_setup_crtcs],
[ 1.394417] [drm:drm_enable_connectors], connector 13 enabled? yes
[ 1.394419] [drm:drm_enable_connectors], connector 10 enabled? no
[ 1.394420] [drm:drm_enable_connectors], connector 21 enabled? no
[ 1.394421] [drm:drm_enable_connectors], connector 25 enabled? no
[ 1.394423] [drm:drm_enable_connectors], connector 27 enabled? no
[ 1.394424] [drm:drm_enable_connectors], connector 31 enabled? no
[ 1.394425] [drm:drm_target_preferred], looking for cmdline mode on connector 13
[ 1.394427] [drm:drm_target_preferred], looking for preferred mode on connector 13
[ 1.394428] [drm:drm_target_preferred], found mode 1600x900
[ 1.394430] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 1.394433] [drm:drm_setup_crtcs], desired mode 1600x900 set on crtc 4
[ 1.394436] [drm:intelfb_create], no BIOS fb, allocating a new one
[ 1.394438] [drm:i915_gem_object_create_stolen], creating stolen object: size=57f000
[ 1.394441] [drm:i915_pages_create_for_stolen], offset=0x0, size=5763072
[ 1.395443] [drm:intelfb_create], allocated 1600x900 fb: 0x000a1000, bo ffff880412680f00
[ 1.395527] fbcon: inteldrmfb (fb0) is primary device
[ 1.395558] [drm:intel_crtc_set_config], [CRTC:4] [FB:33] #connectors=1 (x y) (0 0)
[ 1.395560] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[ 1.395561] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 1.395563] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.395565] [drm:drm_mode_debug_printmodeline], Modeline 32:"1600x900" 60 112600 1600 1664 1706 1954 900 903 906 960 0x48 0xa
[ 1.395566] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
[ 1.395568] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 1.395570] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 1.395571] [drm:connected_sink_compute_bpp], [CONNECTOR:13:eDP-1] checking for sink bpp constrains
[ 1.395572] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
[ 1.395574] [drm:intel_dp_compute_config], DP link computation with max lane count 1 max bw 0a pixel clock 112600KHz
[ 1.395575] [drm:intel_dp_compute_config], DP link bw 0a lane count 1 clock 270000 bpp 18
[ 1.395576] [drm:intel_dp_compute_config], DP link bw required 202680 available 216000
[ 1.395578] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[ 1.395579] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe A
[ 1.395580] [drm:intel_dump_pipe_config], cpu_transcoder: P
[ 1.395580] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 1.395582] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.395583] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 3935655, gmch_n: 4194304, link_m: 218647, link_n: 524288, tu: 64
[ 1.395583] [drm:intel_dump_pipe_config], requested mode:
[ 1.395585] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 60 112600 1600 1664 1706 1954 900 903 906 960 0x48 0xa
[ 1.395586] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.395587] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 60 112600 1600 1664 1706 1954 900 903 906 960 0x48 0xa
[ 1.395589] [drm:intel_dump_crtc_timings], crtc timings: 112600 1600 1664 1706 1954 900 903 906 960, type: 0x48 flags: 0xa
[ 1.395590] [drm:intel_dump_pipe_config], port clock: 270000
[ 1.395590] [drm:intel_dump_pipe_config], pipe src size: 1600x900
[ 1.395591] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.395592] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.395593] [drm:intel_dump_pipe_config], ips: 0
[ 1.395594] [drm:intel_dump_pipe_config], double wide: 0
[ 1.395795] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 1.395811] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 1.396142] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 1.397719] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 1.397720] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 1.398574] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 1.398586] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 1.398906] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 1.399884] [drm:drm_dp_send_link_address], link address reply: 4
[ 1.399886] [drm:drm_dp_send_link_address], port 0: input 1, pdt: 1, pn: 0, dpcd_rev: 00, mcs: 1, ddps: 1, ldps 0, sdp 0/0
[ 1.399887] [drm:drm_dp_send_link_address], port 1: input 0, pdt: 4, pn: 1, dpcd_rev: 00, mcs: 0, ddps: 1, ldps 1, sdp 1/1
[ 1.399889] [drm:drm_dp_send_link_address], port 2: input 0, pdt: 4, pn: 2, dpcd_rev: 00, mcs: 0, ddps: 1, ldps 1, sdp 1/1
[ 1.399890] [drm:drm_dp_send_link_address], port 3: input 0, pdt: 0, pn: 3, dpcd_rev: 00, mcs: 0, ddps: 0, ldps 0, sdp 0/0
[ 1.400386] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 1.400387] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 1.401543] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 1.401555] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 1.401876] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 1.402242] [drm:drm_dp_send_enum_path_resources], enum path resources 1: 90 90
[ 1.402749] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 1.402749] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 1.410970] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 1.410980] [drm:ironlake_edp_backlight_off],
[ 1.491561] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.491562] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.491793] hub 2-1:1.0: USB hub found
[ 1.491863] hub 2-1:1.0: 8 ports detected
[ 1.623436] [drm:ironlake_edp_panel_off], Turn eDP power off
[ 1.623440] [drm:ironlake_wait_panel_off], Wait for panel power off time
[ 1.623444] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000
[ 1.631167] tsc: Refined TSC clocksource calibration: 2494.224 MHz
[ 1.659227] usb 3-7: new full-speed USB device number 2 using xhci_hcd
[ 1.788795] usb 3-7: New USB device found, idVendor=138a, idProduct=0017
[ 1.788796] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 1.788797] usb 3-7: SerialNumber: 96a668dd66f6
[ 1.955637] usb 3-9: new high-speed USB device number 3 using xhci_hcd
[ 2.086122] usb 3-9: New USB device found, idVendor=17ef, idProduct=1010
[ 2.086123] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.086124] usb 3-9: Product: Lenovo ThinkPad Dock
[ 2.086125] usb 3-9: Manufacturer: LENOVO
[ 2.086697] hub 3-9:1.0: USB hub found
[ 2.087135] hub 3-9:1.0: 4 ports detected
[ 2.207893] usb 3-11: new full-speed USB device number 4 using xhci_hcd
[ 2.339664] usb 3-11: New USB device found, idVendor=8087, idProduct=07da
[ 2.339666] usb 3-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.424119] [drm:ironlake_wait_panel_status], Wait complete
[ 2.424125] [drm:intel_update_fbc], no output, disabling
[ 2.424131] [drm:hsw_set_power_well], Requesting to disable the power well
[ 2.424134] [drm:intel_ddi_put_crtc_pll], Disabling SPLL
[ 2.424150] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 6400
[ 2.424153] [drm:intel_crtc_mode_set], [ENCODER:12:TMDS-12] set [MODE:0:1600x900]
[ 2.424154] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
[ 2.424155] [drm:ironlake_edp_panel_on], Turn eDP power on
[ 2.424162] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
[ 2.424164] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
[ 2.424166] [drm:ironlake_wait_panel_status], Wait complete
[ 2.424169] [drm:ironlake_wait_panel_on], Wait for panel power on
[ 2.424172] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd0003
[ 2.424304] usb 3-9.3: new full-speed USB device number 5 using xhci_hcd
[ 2.527110] usb 3-9.3: New USB device found, idVendor=05f3, idProduct=0081
[ 2.527112] usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.527113] usb 3-9.3: Product: Kinesis Keyboard Hub
[ 2.527113] usb 3-9.3: Manufacturer: PI Engineering
[ 2.527239] usb 3-9.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 2.527852] hub 3-9.3:1.0: USB hub found
[ 2.528169] hub 3-9.3:1.0: 4 ports detected
[ 2.616624] usb 3-9.4: new high-speed USB device number 6 using xhci_hcd
[ 2.632303] [drm:ironlake_wait_panel_status], Wait complete
[ 2.632309] [drm:_ironlake_edp_panel_vdd_on], Turning eDP VDD on
[ 2.632318] [drm:_ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[ 2.632366] Switched to clocksource tsc
[ 2.633406] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[ 2.633867] [drm:intel_dp_start_link_train], clock recovery OK
[ 2.634626] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[ 2.696341] [drm:g4x_wait_for_vblank], vblank wait timed out
[ 2.696669] [drm:ironlake_edp_backlight_on],
[ 2.704331] [drm:intel_panel_enable_backlight], pipe A
[ 2.704335] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4438
[ 2.704341] [drm:intel_edp_psr_match_conditions], PSR disable by flag
[ 2.716607] usb 3-9.4: New USB device found, idVendor=17ef, idProduct=100f
[ 2.716609] usb 3-9.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.716610] usb 3-9.4: Product: Lenovo ThinkPad Dock
[ 2.716611] usb 3-9.4: Manufacturer: Lenovo
[ 2.716612] usb 3-9.4: SerialNumber: Rev1.2
[ 2.717093] hub 3-9.4:1.0: USB hub found
[ 2.717158] hub 3-9.4:1.0: 3 ports detected
[ 2.720364] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
[ 2.736441] [drm:intel_connector_check_state], [CONNECTOR:13:eDP-1]
[ 2.736445] [drm:check_encoder_state], [ENCODER:11:DAC-11]
[ 2.736446] [drm:check_encoder_state], [ENCODER:12:TMDS-12]
[ 2.736447] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
[ 2.736448] [drm:check_encoder_state], [ENCODER:22:DP MST-22]
[ 2.736449] [drm:check_encoder_state], [ENCODER:23:DP MST-23]
[ 2.736449] [drm:check_encoder_state], [ENCODER:24:DP MST-24]
[ 2.736450] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
[ 2.736451] [drm:check_encoder_state], [ENCODER:28:DP MST-28]
[ 2.736452] [drm:check_encoder_state], [ENCODER:29:DP MST-29]
[ 2.736452] [drm:check_encoder_state], [ENCODER:30:DP MST-30]
[ 2.736453] [drm:check_crtc_state], [CRTC:4]
[ 2.736459] [drm:check_crtc_state], [CRTC:6]
[ 2.736460] [drm:check_crtc_state], [CRTC:8]
[ 2.736463] [drm:intel_crtc_set_config], [CRTC:6] [NOFB]
[ 2.736465] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0
[ 2.736467] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 2.736468] [drm:intel_crtc_set_config], [CRTC:8] [NOFB]
[ 2.736469] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[ 2.736469] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 2.736476] Console: switching to colour frame buffer device 200x56
[ 2.736483] [drm:intel_crtc_set_config], [CRTC:4] [FB:33] #connectors=1 (x y) (0 0)
[ 2.736484] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 2.736485] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 2.737915] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 2.737934] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 2.738246] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 2.738612] [drm:drm_dp_send_enum_path_resources], enum path resources 2: 504 504
[ 2.738713] [drm:drm_fb_helper_hotplug_event],
[ 2.738714] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1]
[ 2.738716] [drm:intel_dp_detect], [CONNECTOR:13:eDP-1]
[ 2.738724] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 2.738726] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1] probed modes :
[ 2.738728] [drm:drm_mode_debug_printmodeline], Modeline 14:"1600x900" 60 112600 1600 1664 1706 1954 900 903 906 960 0x48 0xa
[ 2.738730] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1]
[ 2.738731] [drm:intel_crt_detect], [CONNECTOR:10:VGA-1] force=1
[ 2.738739] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 2.738740] [drm:intel_crt_detect], CRT not detected via hotplug
[ 2.738909] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 2.738910] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 2.738910] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 2.738911] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 2.739109] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 2.739110] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 2.739444] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 2.739444] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 2.739445] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 2.739446] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1] disconnected
[ 2.739446] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 2.739447] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[ 2.739449] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 2.739450] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1]
[ 2.739450] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-1]
[ 2.741008] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.741009] i915 0000:00:02.0: registered panic notifier
[ 2.752406] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 2.752409] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1] disconnected
[ 2.752410] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 2.752412] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[ 2.752413] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 2.752414] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2]
[ 2.752415] [drm:intel_hdmi_detect], [CONNECTOR:31:HDMI-A-2]
[ 2.752644] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 2.752649] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 2.752652] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2] disconnected
[ 2.752654] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:34:DP-3]
[ 2.755202] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 2.755221] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 2.755533] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 2.756122] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 2.756628] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 2.756630] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 2.756748] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 2.757341] [drm:asle_set_backlight], bclp = 0x80000004
[ 2.757601] acpi device:01: registered as cooling_device4
[ 2.757653] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 2.757724] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.757740] ahci 0000:00:1f.2: version 3.0
[ 2.757864] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 2.757911] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
[ 2.757913] ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo pio slum part ems apst
[ 2.759157] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 2.759190] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 2.759511] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 2.760100] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 2.760614] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 2.760616] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 2.763139] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 2.763149] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 2.763462] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 2.764043] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 2.764550] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 2.764552] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 2.764934] scsi0 : ahci
[ 2.765025] scsi1 : ahci
[ 2.765123] scsi2 : ahci
[ 2.765223] scsi3 : ahci
[ 2.765322] scsi4 : ahci
[ 2.765422] scsi5 : ahci
[ 2.765476] ata1: SATA max UDMA/133 abar m2048@0xe063c000 port 0xe063c100 irq 44
[ 2.765477] ata2: DUMMY
[ 2.765479] ata3: DUMMY
[ 2.765480] ata4: DUMMY
[ 2.765481] ata5: DUMMY
[ 2.765487] ata6: SATA max UDMA/133 abar m2048@0xe063c000 port 0xe063c380 irq 44
[ 2.767074] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 2.767087] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 2.767411] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 2.768004] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 2.768812] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 2.768814] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 2.770545] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 2.770556] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 2.770868] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 2.771451] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 2.771460] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:34:DP-3] probed modes :
[ 2.771463] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 2.771466] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 2.771468] [drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 2.771476] [drm:drm_mode_debug_printmodeline], Modeline 43:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[ 2.771478] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[ 2.771481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:36:DP-4]
[ 2.772275] [drm:intel_dp_check_mst_status], got esi2 02 10 00
[ 2.772277] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 2.773316] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 2.773547] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 2.773549] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 2.773561] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 2.773873] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 2.776087] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 2.776112] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 2.776430] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 2.777971] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 2.777973] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 2.778921] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 2.778945] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 2.779262] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 2.780801] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 2.780803] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 2.781742] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 2.781753] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 2.782065] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 2.783094] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 2.783098] [drm:drm_mode_debug_printmodeline], Modeline 46:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 2.783100] [drm:drm_mode_prune_invalid], Not using 1280x1024 mode 12
[ 2.783102] [drm:drm_mode_debug_printmodeline], Modeline 51:"1280x1024" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 2.783104] [drm:drm_mode_prune_invalid], Not using 1280x1024 mode 12
[ 2.783106] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:36:DP-4] probed modes :
[ 2.783108] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 2.783111] [drm:drm_mode_debug_printmodeline], Modeline 53:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 2.783113] [drm:drm_mode_debug_printmodeline], Modeline 54:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 2.783115] [drm:drm_mode_debug_printmodeline], Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 2.783118] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 2.783120] [drm:drm_mode_debug_printmodeline], Modeline 49:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 2.783122] [drm:drm_mode_debug_printmodeline], Modeline 50:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 2.783124] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5]
[ 2.783126] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5] disconnected
[ 2.783129] [drm:drm_setup_crtcs],
[ 2.783131] [drm:drm_enable_connectors], connector 13 enabled? yes
[ 2.783132] [drm:drm_enable_connectors], connector 10 enabled? no
[ 2.783134] [drm:drm_enable_connectors], connector 21 enabled? no
[ 2.783135] [drm:drm_enable_connectors], connector 25 enabled? no
[ 2.783137] [drm:drm_enable_connectors], connector 27 enabled? no
[ 2.783138] [drm:drm_enable_connectors], connector 31 enabled? no
[ 2.783139] [drm:drm_enable_connectors], connector 34 enabled? yes
[ 2.783141] [drm:drm_enable_connectors], connector 36 enabled? yes
[ 2.783142] [drm:drm_enable_connectors], connector 38 enabled? no
[ 2.783143] [drm:drm_target_preferred], looking for cmdline mode on connector 13
[ 2.783145] [drm:drm_target_preferred], looking for preferred mode on connector 13
[ 2.783146] [drm:drm_target_preferred], found mode 1600x900
[ 2.783148] [drm:drm_target_preferred], looking for cmdline mode on connector 34
[ 2.783149] [drm:drm_target_preferred], looking for preferred mode on connector 34
[ 2.783150] [drm:drm_target_preferred], found mode 1024x768
[ 2.783152] [drm:drm_target_preferred], looking for cmdline mode on connector 36
[ 2.783153] [drm:drm_target_preferred], looking for preferred mode on connector 36
[ 2.783154] [drm:drm_target_preferred], found mode 1024x768
[ 2.783155] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 2.783163] [drm:drm_setup_crtcs], desired mode 1600x900 set on crtc 4
[ 2.783165] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 6
[ 2.783166] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 8
[ 2.783169] [drm:intel_crtc_set_config], [CRTC:4] [FB:33] #connectors=1 (x y) (0 0)
[ 2.783172] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 2.783175] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 2.783177] [drm:intel_crtc_set_config], [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
[ 2.783179] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[ 2.783180] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 2.783182] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 2.783185] [drm:drm_mode_debug_printmodeline], Modeline 46:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 2.783186] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=1, fb_changed=0
[ 2.783188] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[ 2.783189] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 2.783191] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 2.783192] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 2.783194] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 2.783196] [drm:connected_sink_compute_bpp], [CONNECTOR:34:DP-3] checking for sink bpp constrains
[ 2.783199] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 2.783201] [drm:intel_dump_pipe_config], [CRTC:6][modeset] config for pipe B
[ 2.783202] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 2.783204] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 2.783205] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 2.783207] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 757304, gmch_n: 8388608, link_m: 126217, link_n: 1048576, tu: 6
[ 2.783209] [drm:intel_dump_pipe_config], requested mode:
[ 2.783211] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 2.783212] [drm:intel_dump_pipe_config], adjusted mode:
[ 2.783214] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 2.783217] [drm:intel_dump_crtc_timings], crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa
[ 2.783218] [drm:intel_dump_pipe_config], port clock: 540000
[ 2.783219] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[ 2.783221] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 2.783222] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 2.783223] [drm:intel_dump_pipe_config], ips: 0
[ 2.783225] [drm:intel_dump_pipe_config], double wide: 0
[ 2.783229] [drm:hsw_set_power_well], Enabling power well
[ 2.783247] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 6400
[ 2.783251] [drm:intel_crtc_mode_set], [ENCODER:29:DP MST-29] set [MODE:0:1024x768]
[ 2.783253] [drm:intel_mst_pre_enable_dp], 0
[ 2.783585] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 2.783587] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 2.785302] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[ 2.796529] [drm:intel_print_rc6_info], Haswell: only RC6 available
[ 2.796531] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2.800779] usb 3-9.3.2: new full-speed USB device number 7 using xhci_hcd
[ 2.802857] [drm:intel_dp_start_link_train], clock recovery OK
[ 2.804437] [drm:gen6_enable_rps], Overclocking supported. Max: 1150MHz, Overclock max: 1150MHz
[ 2.824469] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[ 2.824936] [drm:drm_dp_mst_allocate_vcpi], initing vcpi for 233 6
[ 2.888524] [drm:g4x_wait_for_vblank], vblank wait timed out
[ 2.888527] [drm:intel_mst_enable_dp], 1
[ 2.897674] [drm:drm_dp_update_payload_part2], payload 0 1
[ 2.898967] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 2.898977] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 2.900224] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 2.900642] usb 3-9.3.2: New USB device found, idVendor=05f3, idProduct=0007
[ 2.900644] usb 3-9.3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.902515] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.903204] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 2.903207] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 2.909865] usbcore: registered new interface driver usbhid
[ 2.909866] usbhid: USB HID core driver
[ 2.910321] input: HID 05f3:0007 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3.2/3-9.3.2:1.0/0003:05F3:0007.0001/input/input8
[ 2.910430] hid-generic 0003:05F3:0007.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 05f3:0007] on usb-0000:00:14.0-9.3.2/input0
[ 2.919508] input: HID 05f3:0007 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3.2/3-9.3.2:1.1/0003:05F3:0007.0002/input/input9
[ 2.919610] hid-generic 0003:05F3:0007.0002: input,hidraw1: USB HID v1.00 Device [HID 05f3:0007] on usb-0000:00:14.0-9.3.2/input1
[ 2.940629] [drm:intel_update_fbc], more than one pipe active, disabling compression
[ 2.956638] [drm:intel_connector_check_state], [CONNECTOR:13:eDP-1]
[ 2.956644] [drm:intel_connector_check_state], [CONNECTOR:34:DP-3]
[ 2.956646] [drm:check_encoder_state], [ENCODER:11:DAC-11]
[ 2.956647] [drm:check_encoder_state], [ENCODER:12:TMDS-12]
[ 2.956649] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
[ 2.956650] [drm:check_encoder_state], [ENCODER:22:DP MST-22]
[ 2.956652] [drm:check_encoder_state], [ENCODER:23:DP MST-23]
[ 2.956653] [drm:check_encoder_state], [ENCODER:24:DP MST-24]
[ 2.956654] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
[ 2.956656] [drm:check_encoder_state], [ENCODER:28:DP MST-28]
[ 2.956657] [drm:check_encoder_state], [ENCODER:29:DP MST-29]
[ 2.956658] [drm:check_encoder_state], [ENCODER:30:DP MST-30]
[ 2.956659] [drm:check_crtc_state], [CRTC:4]
[ 2.956665] [drm:check_crtc_state], [CRTC:6]
[ 2.956669] [drm:check_crtc_state], [CRTC:8]
[ 2.956673] [drm:intel_crtc_set_config], [CRTC:8] [FB:33] #connectors=1 (x y) (0 0)
[ 2.956675] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[ 2.956676] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 2.956678] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 2.956680] [drm:drm_mode_debug_printmodeline], Modeline 51:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 2.956682] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:8], mode_changed=1, fb_changed=0
[ 2.956683] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[ 2.956685] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 2.956686] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 2.956687] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 2.956689] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 2.956690] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 4, prepare: 4, disable: 0
[ 2.956692] [drm:connected_sink_compute_bpp], [CONNECTOR:36:DP-4] checking for sink bpp constrains
[ 2.956694] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 2.956696] [drm:intel_dump_pipe_config], [CRTC:8][modeset] config for pipe C
[ 2.956697] [drm:intel_dump_pipe_config], cpu_transcoder: C
[ 2.956698] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 2.956699] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 2.956701] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 918086, gmch_n: 8388608, link_m: 153014, link_n: 1048576, tu: 8
[ 2.956702] [drm:intel_dump_pipe_config], requested mode:
[ 2.956704] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 2.956705] [drm:intel_dump_pipe_config], adjusted mode:
[ 2.956706] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 2.956708] [drm:intel_dump_crtc_timings], crtc timings: 78800 1024 1040 1136 1312 768 769 772 800, type: 0x40 flags: 0x5
[ 2.956709] [drm:intel_dump_pipe_config], port clock: 540000
[ 2.956710] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[ 2.956712] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 2.956713] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 2.956714] [drm:intel_dump_pipe_config], ips: 0
[ 2.956715] [drm:intel_dump_pipe_config], double wide: 0
[ 2.956733] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 6400
[ 2.956736] [drm:intel_crtc_mode_set], [ENCODER:30:DP MST-30] set [MODE:0:1024x768]
[ 2.956738] [drm:intel_mst_pre_enable_dp], 1
[ 2.956740] [drm:drm_dp_mst_allocate_vcpi], initing vcpi for 282 8
[ 2.981271] usb 3-9.3.3: new low-speed USB device number 8 using xhci_hcd
[ 3.020745] [drm:g4x_wait_for_vblank], vblank wait timed out
[ 3.020751] [drm:intel_mst_enable_dp], 2
[ 3.029898] [drm:drm_dp_update_payload_part2], payload 0 2
[ 3.029902] [drm:drm_dp_update_payload_part2], payload 1 1
[ 3.072896] usb 3-9.3.3: New USB device found, idVendor=046d, idProduct=c05a
[ 3.072899] usb 3-9.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.072900] usb 3-9.3.3: Product: USB Optical Mouse
[ 3.072902] usb 3-9.3.3: Manufacturer: Logitech
[ 3.073036] usb 3-9.3.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.075795] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3.3/3-9.3.3:1.0/0003:046D:C05A.0003/input/input10
[ 3.076017] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-9.3.3/input0
[ 3.084829] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.084854] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.088052] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 3.088056] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 3.088269] ata1.00: supports DRM functions and may not be fully accessible
[ 3.088393] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.088394] ata1.00: ATA-9: SAMSUNG MZ7TE256HMHP-000L7, EXT09L6Q, max UDMA/133
[ 3.088396] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 3.089202] ata6.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 3.089739] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 3.089743] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 3.089969] ata1.00: supports DRM functions and may not be fully accessible
[ 3.090083] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3.090172] ata1.00: configured for UDMA/133
[ 3.090365] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7TE256 EXT0 PQ: 0 ANSI: 5
[ 3.090500] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 3.090537] sd 0:0:0:0: [sda] Write Protect is off
[ 3.090539] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.090548] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.090550] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.090696] ata6.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 3.092056] sda: sda1 sda2 sda3
[ 3.092277] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.092662] ata6.00: ATAPI: HL-DT-ST DVDRAM GU90N, LU20, max UDMA/133
[ 3.096450] ata6.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 3.098018] ata6.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 3.101215] ata6.00: configured for UDMA/133
[ 3.102011] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 3.102050] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 3.103293] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 3.103697] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GU90N LU20 PQ: 0 ANSI: 5
[ 3.106235] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 3.106237] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 3.114995] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.114998] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.115134] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 3.115206] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 3.132813] [drm:intel_connector_check_state], [CONNECTOR:13:eDP-1]
[ 3.132819] [drm:intel_connector_check_state], [CONNECTOR:34:DP-3]
[ 3.132821] [drm:intel_connector_check_state], [CONNECTOR:36:DP-4]
[ 3.132822] [drm:check_encoder_state], [ENCODER:11:DAC-11]
[ 3.132824] [drm:check_encoder_state], [ENCODER:12:TMDS-12]
[ 3.132825] [drm:check_encoder_state], [ENCODER:20:TMDS-20]
[ 3.132827] [drm:check_encoder_state], [ENCODER:22:DP MST-22]
[ 3.132828] [drm:check_encoder_state], [ENCODER:23:DP MST-23]
[ 3.132829] [drm:check_encoder_state], [ENCODER:24:DP MST-24]
[ 3.132830] [drm:check_encoder_state], [ENCODER:26:TMDS-26]
[ 3.132832] [drm:check_encoder_state], [ENCODER:28:DP MST-28]
[ 3.132833] [drm:check_encoder_state], [ENCODER:29:DP MST-29]
[ 3.132834] [drm:check_encoder_state], [ENCODER:30:DP MST-30]
[ 3.132835] [drm:check_crtc_state], [CRTC:4]
[ 3.132842] [drm:check_crtc_state], [CRTC:6]
[ 3.132846] [drm:check_crtc_state], [CRTC:8]
[ 3.132857] [drm:asle_set_backlight], updating opregion backlight 4/255
[ 3.132859] [drm:intel_panel_actually_set_backlight], set backlight PWM = 68
[ 3.132861] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 3.132863] [drm:asle_work], No request on ASLC interrupt 0x00010000
[ 3.148918] usb 3-9.4.1: new low-speed USB device number 9 using xhci_hcd
[ 3.165977] [drm:intel_crtc_set_config], [CRTC:4] [FB:33] #connectors=1 (x y) (0 0)
[ 3.165981] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 3.165982] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 3.165983] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 3.165984] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 3.165986] [drm:intel_crtc_set_config], [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
[ 3.165987] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0
[ 3.165988] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 3.165989] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 3.165989] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 3.165990] [drm:intel_crtc_set_config], [CRTC:8] [FB:33] #connectors=1 (x y) (0 0)
[ 3.165991] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[ 3.165992] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 3.165993] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 3.165993] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 3.225347] [drm:i915_gem_open],
[ 3.225362] [drm:intel_crtc_cursor_set], cursor off
[ 3.225365] [drm:intel_crtc_set_config], [CRTC:4] [FB:33] #connectors=1 (x y) (0 0)
[ 3.225368] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 3.225370] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 3.225372] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 3.225373] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 3.225375] [drm:intel_crtc_cursor_set], cursor off
[ 3.225376] [drm:intel_crtc_set_config], [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
[ 3.225378] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0
[ 3.225379] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 3.225381] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 3.225382] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 3.225383] [drm:intel_crtc_cursor_set], cursor off
[ 3.225384] [drm:intel_crtc_set_config], [CRTC:8] [FB:33] #connectors=1 (x y) (0 0)
[ 3.225386] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[ 3.225388] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 3.225389] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 3.225390] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 3.225396] [drm:i915_gem_open],
[ 3.225401] [drm:intel_crtc_cursor_set], cursor off
[ 3.225402] [drm:intel_crtc_set_config], [CRTC:4] [FB:33] #connectors=1 (x y) (0 0)
[ 3.225404] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 3.225405] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 3.225406] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 3.225407] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 3.225408] [drm:intel_crtc_cursor_set], cursor off
[ 3.225409] [drm:intel_crtc_set_config], [CRTC:6] [FB:33] #connectors=1 (x y) (0 0)
[ 3.225411] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0
[ 3.225412] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 3.225413] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 3.225414] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 3.225415] [drm:intel_crtc_cursor_set], cursor off
[ 3.225417] [drm:intel_crtc_set_config], [CRTC:8] [FB:33] #connectors=1 (x y) (0 0)
[ 3.225418] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[ 3.225419] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 3.225420] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 3.225421] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 3.225426] [drm:i915_gem_open],
[ 3.225470] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[9] ENCODERS[10]
[ 3.225473] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[9] ENCODERS[10]
[ 3.225479] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 3.225481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1]
[ 3.225483] [drm:intel_dp_detect], [CONNECTOR:13:eDP-1]
[ 3.225491] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 3.225494] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1] probed modes :
[ 3.225496] [drm:drm_mode_debug_printmodeline], Modeline 14:"1600x900" 60 112600 1600 1664 1706 1954 900 903 906 960 0x48 0xa
[ 3.225498] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 3.227505] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[ 3.227507] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1]
[ 3.227509] [drm:intel_crt_detect], [CONNECTOR:10:VGA-1] force=1
[ 3.227517] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 3.227517] [drm:intel_crt_detect], CRT not detected via hotplug
[ 3.227754] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 3.227757] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.227769] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 3.227770] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 3.228281] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.228282] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 3.228283] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 3.228285] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1] disconnected
[ 3.228293] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[ 3.228294] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1]
[ 3.228296] [drm:intel_crt_detect], [CONNECTOR:10:VGA-1] force=1
[ 3.228298] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 3.228299] [drm:intel_crt_detect], CRT not detected via hotplug
[ 3.228509] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 3.228510] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.228511] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 3.228512] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 3.229048] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.229049] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 3.229050] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 3.229052] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1] disconnected
[ 3.229057] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 3.229058] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 3.229061] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[ 3.229068] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 3.229070] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 3.229071] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 3.229072] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[ 3.229080] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 3.229082] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 3.229084] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1]
[ 3.229085] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-1]
[ 3.244974] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 3.244975] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1] disconnected
[ 3.244977] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 3.244978] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1]
[ 3.244979] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-1]
[ 3.258971] usb 3-9.4.1: New USB device found, idVendor=046d, idProduct=c508
[ 3.258973] usb 3-9.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.258974] usb 3-9.4.1: Product: USB Receiver
[ 3.258975] usb 3-9.4.1: Manufacturer: Logitech
[ 3.259113] usb 3-9.4.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.260992] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 3.260994] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1] disconnected
[ 3.260997] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 3.260999] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 3.261000] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[ 3.261001] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 3.261002] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 3.261003] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 3.261004] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[ 3.261005] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 3.261007] [drm:drm_mode_getconnector], [CONNECTOR:31:?]
[ 3.261008] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2]
[ 3.261009] [drm:intel_hdmi_detect], [CONNECTOR:31:HDMI-A-2]
[ 3.261236] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 3.261238] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 3.261240] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2] disconnected
[ 3.261253] [drm:drm_mode_getconnector], [CONNECTOR:31:?]
[ 3.261254] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2]
[ 3.261255] [drm:intel_hdmi_detect], [CONNECTOR:31:HDMI-A-2]
[ 3.261482] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 3.261483] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 3.261484] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2] disconnected
[ 3.261488] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 3.261489] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:34:DP-3]
[ 3.263903] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.1/3-9.4.1:1.0/0003:046D:C508.0004/input/input11
[ 3.263988] hid-generic 0003:046D:C508.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-9.4.1/input0
[ 3.314775] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 3.314811] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 3.316060] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 3.318452] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 3.320144] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 3.320145] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 3.322685] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 3.322696] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 3.323908] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 3.326291] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 3.328035] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 3.328037] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 3.330568] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 3.330579] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 3.331804] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 3.334250] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 3.335939] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 3.335941] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 3.338471] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 3.338482] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 3.339694] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 3.342077] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 3.343767] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 3.343769] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 3.346297] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 3.346307] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 3.347521] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 3.349075] usb 3-9.4.2: new high-speed USB device number 10 using xhci_hcd
[ 3.349986] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 3.350000] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:34:DP-3] probed modes :
[ 3.350004] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 3.350007] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 3.350009] [drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 3.350012] [drm:drm_mode_debug_printmodeline], Modeline 43:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[ 3.350014] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[ 3.350024] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 3.351423] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 3.351427] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:36:DP-4]
[ 3.351680] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 3.351681] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 3.352955] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 3.352966] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 3.354181] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 3.357099] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 3.357101] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 3.358785] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 3.358796] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 3.360009] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 3.365167] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 3.365375] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 3.365377] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 3.365386] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 3.366597] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 3.371778] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 3.371996] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 3.371997] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 3.372007] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 3.373219] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 3.376933] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 3.376938] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:36:DP-4] probed modes :
[ 3.376941] [drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 3.376943] [drm:drm_mode_debug_printmodeline], Modeline 60:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 3.376946] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 3.376948] [drm:drm_mode_debug_printmodeline], Modeline 53:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 3.376951] [drm:drm_mode_debug_printmodeline], Modeline 54:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 3.376953] [drm:drm_mode_debug_printmodeline], Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 3.376955] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 3.376958] [drm:drm_mode_debug_printmodeline], Modeline 49:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 3.376960] [drm:drm_mode_debug_printmodeline], Modeline 50:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 3.376965] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 3.378610] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 3.378612] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 3.378903] [drm:drm_mode_getconnector], [CONNECTOR:38:?]
[ 3.378905] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5]
[ 3.378907] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5] disconnected
[ 3.378910] [drm:drm_mode_getconnector], [CONNECTOR:38:?]
[ 3.378912] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5]
[ 3.378913] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5] disconnected
[ 3.378933] [drm:drm_mode_addfb], [FB:56]
[ 3.418625] [drm:drm_mode_addfb], [FB:56]
[ 3.418646] [drm:drm_mode_addfb], [FB:57]
[ 3.418652] [drm:drm_mode_addfb], [FB:58]
[ 3.421335] [drm:drm_mode_setcrtc], [CRTC:4]
[ 3.421338] [drm:drm_mode_setcrtc], [CONNECTOR:13:eDP-1]
[ 3.421340] [drm:intel_crtc_set_config], [CRTC:4] [FB:56] #connectors=1 (x y) (0 0)
[ 3.421343] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=1
[ 3.421346] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 3.421348] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 3.421349] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 3.424450] [drm:ironlake_update_plane], Writing base 00620000 00000000 0 0 6400
[ 3.439857] [drm:drm_mode_setcrtc], [CRTC:4]
[ 3.439863] [drm:drm_mode_setcrtc], [CONNECTOR:13:eDP-1]
[ 3.439865] [drm:intel_crtc_set_config], [CRTC:4] [FB:56] #connectors=1 (x y) (0 0)
[ 3.439868] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 3.439870] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 3.439871] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 3.439872] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 3.439888] [drm:drm_mode_setcrtc], [CRTC:6]
[ 3.439890] [drm:drm_mode_setcrtc], [CONNECTOR:34:DP-3]
[ 3.439891] [drm:intel_crtc_set_config], [CRTC:6] [FB:57] #connectors=1 (x y) (0 0)
[ 3.439892] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=1
[ 3.439893] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 3.439894] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 3.439895] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 3.442317] [drm:ironlake_update_plane], Writing base 00B9F000 00000000 0 0 4096
[ 3.458782] [drm:drm_mode_setcrtc], [CRTC:6]
[ 3.458786] [drm:drm_mode_setcrtc], [CONNECTOR:34:DP-3]
[ 3.458788] [drm:intel_crtc_set_config], [CRTC:6] [FB:57] #connectors=1 (x y) (0 0)
[ 3.458791] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=0
[ 3.458793] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 3.458794] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 3.458795] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 3.458810] [drm:drm_mode_setcrtc], [CRTC:8]
[ 3.458812] [drm:drm_mode_setcrtc], [CONNECTOR:36:DP-4]
[ 3.458813] [drm:intel_crtc_set_config], [CRTC:8] [FB:58] #connectors=1 (x y) (0 0)
[ 3.458814] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:8], mode_changed=0, fb_changed=1
[ 3.458815] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 3.458816] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 3.458817] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 3.461241] [drm:ironlake_update_plane], Writing base 00E9F000 00000000 0 0 4096
[ 3.478860] [drm:drm_mode_setcrtc], [CRTC:8]
[ 3.478865] [drm:drm_mode_setcrtc], [CONNECTOR:36:DP-4]
[ 3.478867] [drm:intel_crtc_set_config], [CRTC:8] [FB:58] #connectors=1 (x y) (0 0)
[ 3.478870] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[ 3.478872] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 3.478873] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 3.478874] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 3.671025] usb 3-9.4.2: New USB device found, idVendor=046d, idProduct=0825
[ 3.671029] usb 3-9.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[ 3.671030] usb 3-9.4.2: SerialNumber: 11BBA620
[ 4.033842] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
[ 4.033855] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[ 4.210107] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 5.510070] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 5.712545] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6
[ 6.380994] random: nonblocking pool is initialized
[ 9.789049] bio: create slab <bio-1> at 1
[ 9.945264] bio: create slab <bio-0> at 0
[ 10.002198] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.223682] Adding 16654332k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:16654332k SSFS
[ 10.303804] systemd-udevd[453]: starting version 204
[ 10.344781] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 10.369846] lp: driver loaded but no devices found
[ 10.376199] ppdev: user-space parallel port driver
[ 10.382259] cfg80211: module has bad taint, not creating trace events
[ 10.382415] cfg80211: Calling CRDA to update world regulatory domain
[ 10.384646] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182f conflicts with OpRegion 0x0000000000001800-0x000000000000187f (\_SB_.PCI0.LPC_.PMIO) (20131218/utaddress-258)
[ 10.384653] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.384662] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083f conflicts with OpRegion 0x0000000000000800-0x000000000000087f (\_SB_.PCI0.LPC_.LPIO) (20131218/utaddress-258)
[ 10.384665] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.384667] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000087f (\_SB_.PCI0.LPC_.LPIO) (20131218/utaddress-258)
[ 10.384670] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.384671] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.390079] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 10.402795] iwlwifi: module has bad taint, not creating trace events
[ 10.403068] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 10.403069] Copyright(c) 2003- 2014 Intel Corporation
[ 10.403273] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 10.406624] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
[ 10.420980] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 10.470921] audit: type=1400 audit(1405599707.178:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=555 comm="apparmor_parser"
[ 10.470927] audit: type=1400 audit(1405599707.178:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=555 comm="apparmor_parser"
[ 10.470931] audit: type=1400 audit(1405599707.178:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=555 comm="apparmor_parser"
[ 10.471314] audit: type=1400 audit(1405599707.178:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=555 comm="apparmor_parser"
[ 10.471319] audit: type=1400 audit(1405599707.178:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=555 comm="apparmor_parser"
[ 10.471506] audit: type=1400 audit(1405599707.178:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=555 comm="apparmor_parser"
[ 10.474754] mac80211: module has bad taint, not creating trace events
[ 10.478744] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 10.478748] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 10.478750] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 10.478752] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[ 10.478860] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 10.503956] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 10.513998] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 10.538547] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 10.542036] Non-volatile memory driver v1.3
[ 10.546705] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 10.546708] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 10.546710] thinkpad_acpi: ThinkPad BIOS GLET70WW (2.24 ), EC unknown
[ 10.546711] thinkpad_acpi: Lenovo ThinkPad T440p, model 20ANCTO1WW
[ 10.549465] thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel@lists.sourceforge.net
[ 10.549495] thinkpad_acpi: radio switch found; radios are enabled
[ 10.549510] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 10.549511] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 10.551656] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 10.552111] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 10.553627] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input12
[ 10.583604] kvm: module has bad taint, not creating trace events
[ 10.627990] kvm: disabled by bios
[ 10.803759] snd_hda_codec: module has bad taint, not creating trace events
[ 10.803857] Bluetooth: Core ver 2.18
[ 10.803895] NET: Registered protocol family 31
[ 10.803897] Bluetooth: HCI device and connection manager initialized
[ 10.803904] Bluetooth: HCI socket layer initialized
[ 10.803906] Bluetooth: L2CAP socket layer initialized
[ 10.803914] Bluetooth: SCO socket layer initialized
[ 10.807103] snd_hda_intel: module has bad taint, not creating trace events
[ 10.807285] HDA driver get symbol successfully from i915 module
[ 10.807315] snd_hda_intel 0000:00:03.0: irq 47 for MSI/MSI-X
[ 10.807558] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 10.823999] usbcore: registered new interface driver btusb
[ 10.860511] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 10.860693] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 10.861046] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 10.867910] SKU: Nid=0x1d sku_cfg=0x40738105
[ 10.867913] SKU: port_connectivity=0x1
[ 10.867914] SKU: enable_pcbeep=0x1
[ 10.867915] SKU: check_sum=0x00000003
[ 10.867916] SKU: customization=0x00000081
[ 10.867917] SKU: external_amp=0x0
[ 10.867918] SKU: platform_type=0x1
[ 10.867919] SKU: swap=0x0
[ 10.867920] SKU: override=0x1
[ 10.868142] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.868143] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.868145] hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 10.868146] mono: mono_out=0x0
[ 10.868147] inputs:
[ 10.868149] Mic=0x1a
[ 10.868150] Internal Mic=0x12
[ 10.868151] realtek: No valid SSID, checking pincfg 0x40738105 for NID 0x1d
[ 10.868153] realtek: Enabling init ASM_ID=0x8105 CODEC_ID=10ec0292
[ 10.869025] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.869028] Bluetooth: BNEP filters: protocol multicast
[ 10.869035] Bluetooth: BNEP socket layer initialized
[ 10.872659] videodev: module has bad taint, not creating trace events
[ 10.872716] Linux video capture interface: v2.00
[ 10.888569] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 10.888735] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 10.906087] Bluetooth: RFCOMM TTY layer initialized
[ 10.906098] Bluetooth: RFCOMM socket layer initialized
[ 10.906103] Bluetooth: RFCOMM ver 1.11
[ 10.911705] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
[ 10.917031] cfg80211: World regulatory domain updated:
[ 10.917034] cfg80211: DFS Master region: unset
[ 10.917036] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.917038] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.917039] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.917041] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.917042] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.917044] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.944703] audit: type=1400 audit(1405599707.650:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=922 comm="apparmor_parser"
[ 10.944709] audit: type=1400 audit(1405599707.650:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=922 comm="apparmor_parser"
[ 10.945014] audit: type=1400 audit(1405599707.650:10): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=922 comm="apparmor_parser"
[ 11.009487] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.2/3-9.4.2:1.0/input/input18
[ 11.010300] usbcore: registered new interface driver uvcvideo
[ 11.010303] USB Video Class driver (1.1.1)
[ 11.067641] init: failsafe main process (950) killed by TERM signal
[ 11.229721] audit: type=1400 audit(1405599707.938:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1168 comm="apparmor_parser"
[ 11.314004] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 11.386457] [drm:i915_gem_open],
[ 11.386471] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[9] ENCODERS[10]
[ 11.386474] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[9] ENCODERS[10]
[ 11.386479] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 11.386481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1]
[ 11.386483] [drm:intel_dp_detect], [CONNECTOR:13:eDP-1]
[ 11.386491] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 11.386493] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1] probed modes :
[ 11.386495] [drm:drm_mode_debug_printmodeline], Modeline 14:"1600x900" 60 112600 1600 1664 1706 1954 900 903 906 960 0x48 0xa
[ 11.386497] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 11.386502] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[ 11.386503] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1]
[ 11.386504] [drm:intel_crt_detect], [CONNECTOR:10:VGA-1] force=1
[ 11.386512] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 11.386513] [drm:intel_crt_detect], CRT not detected via hotplug
[ 11.386689] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 11.386691] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 11.386693] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 11.386695] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 11.387207] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 11.387209] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 11.387211] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 11.387213] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1] disconnected
[ 11.387218] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[ 11.387220] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1]
[ 11.387221] [drm:intel_crt_detect], [CONNECTOR:10:VGA-1] force=1
[ 11.387229] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 11.387230] [drm:intel_crt_detect], CRT not detected via hotplug
[ 11.387396] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 11.387399] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 11.387400] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 11.387402] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 11.387913] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 11.387916] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 11.387918] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 11.387920] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1] disconnected
[ 11.387927] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 11.387929] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 11.387931] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[ 11.387940] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 11.387943] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 11.387944] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 11.387946] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[ 11.387953] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 11.387957] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 11.387959] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1]
[ 11.387961] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-1]
[ 11.401915] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 11.401921] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1] disconnected
[ 11.401930] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 11.401932] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1]
[ 11.401934] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-1]
[ 11.418096] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 11.418223] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.420222] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 11.425703] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0
[ 11.426355] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 11.426360] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1] disconnected
[ 11.426371] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 11.426374] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 11.426376] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[ 11.426378] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 11.426380] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 11.426382] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 11.426383] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[ 11.426384] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 11.426387] [drm:drm_mode_getconnector], [CONNECTOR:31:?]
[ 11.426389] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2]
[ 11.426391] [drm:intel_hdmi_detect], [CONNECTOR:31:HDMI-A-2]
[ 11.426866] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 11.426869] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 11.426871] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2] disconnected
[ 11.426876] [drm:drm_mode_getconnector], [CONNECTOR:31:?]
[ 11.426878] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2]
[ 11.426879] [drm:intel_hdmi_detect], [CONNECTOR:31:HDMI-A-2]
[ 11.427790] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 11.427794] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 11.427797] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2] disconnected
[ 11.427806] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 11.427808] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:34:DP-3]
[ 11.430349] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 11.430363] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 11.432715] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 11.436364] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 11.438801] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 11.438805] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 11.441407] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 11.441422] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 11.442645] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 11.445016] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 11.446724] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 11.446728] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 11.449275] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 11.449297] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 11.453672] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 11.456053] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 11.457758] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 11.457761] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 11.460300] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 11.460316] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 11.461541] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 11.464050] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 11.465800] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 11.465804] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 11.468337] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 11.468352] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 11.473383] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 11.479333] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 11.479359] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:34:DP-3] probed modes :
[ 11.479364] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 11.479366] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 11.479369] [drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 11.479371] [drm:drm_mode_debug_printmodeline], Modeline 43:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[ 11.479373] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[ 11.479381] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 11.479393] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 11.479395] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:36:DP-4]
[ 11.483518] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 11.483521] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 11.484803] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 11.484865] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 11.486469] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 11.489786] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 11.489790] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 11.491485] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 11.491501] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 11.492729] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 11.498022] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 11.498268] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 11.498271] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 11.498283] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 11.499929] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 11.505819] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 11.506115] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 11.506118] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 11.506130] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 11.507358] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 11.511481] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 11.511492] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:36:DP-4] probed modes :
[ 11.511495] [drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 11.511498] [drm:drm_mode_debug_printmodeline], Modeline 60:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 11.511500] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 11.511503] [drm:drm_mode_debug_printmodeline], Modeline 53:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 11.511505] [drm:drm_mode_debug_printmodeline], Modeline 54:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 11.511508] [drm:drm_mode_debug_printmodeline], Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 11.511510] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 11.511513] [drm:drm_mode_debug_printmodeline], Modeline 49:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 11.511515] [drm:drm_mode_debug_printmodeline], Modeline 50:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 11.511524] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 11.511535] [drm:drm_mode_getconnector], [CONNECTOR:38:?]
[ 11.511537] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5]
[ 11.511540] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5] disconnected
[ 11.511543] [drm:drm_mode_getconnector], [CONNECTOR:38:?]
[ 11.511544] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5]
[ 11.511546] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5] disconnected
[ 11.516458] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 11.516461] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 11.644213] [drm:i915_gem_open],
[ 11.660469] [drm:i915_gem_open],
[ 11.660490] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[9] ENCODERS[10]
[ 11.660670] [drm:i915_gem_open],
[ 11.660678] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[9] ENCODERS[10]
[ 11.660680] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[9] ENCODERS[10]
[ 11.661103] [drm:drm_mode_addfb], [FB:59]
[ 11.661280] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[9] ENCODERS[10]
[ 11.661282] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[9] ENCODERS[10]
[ 11.661303] [drm:intel_crtc_cursor_set], cursor off
[ 11.661309] [drm:intel_crtc_cursor_set], cursor off
[ 11.661315] [drm:intel_crtc_cursor_set], cursor off
[ 11.661318] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 11.661326] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 11.661435] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[ 11.661439] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[ 11.661450] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 11.661453] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 11.661464] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 11.661466] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 11.661477] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 11.661480] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 11.661491] [drm:drm_mode_getconnector], [CONNECTOR:31:?]
[ 11.661493] [drm:drm_mode_getconnector], [CONNECTOR:31:?]
[ 11.661504] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 11.661506] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 11.661510] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 11.661523] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 11.661525] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 11.661529] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 11.661541] [drm:drm_mode_getconnector], [CONNECTOR:38:?]
[ 11.661543] [drm:drm_mode_getconnector], [CONNECTOR:38:?]
[ 11.661547] [drm:drm_mode_getconnector], [CONNECTOR:38:?]
[ 11.673232] [drm:drm_mode_addfb], [FB:59]
[ 11.673486] [drm:drm_mode_setcrtc], [CRTC:4]
[ 11.673489] [drm:drm_mode_setcrtc], [CONNECTOR:13:eDP-1]
[ 11.673491] [drm:intel_crtc_set_config], [CRTC:4] [FB:59] #connectors=1 (x y) (0 0)
[ 11.673495] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=1
[ 11.673496] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 11.673498] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 11.673499] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 11.674487] [drm:ironlake_update_plane], Writing base 011BF000 00000000 0 0 6656
[ 11.686361] [drm:drm_mode_setcrtc], [CRTC:6]
[ 11.686366] [drm:drm_mode_setcrtc], [CONNECTOR:34:DP-3]
[ 11.686368] [drm:intel_crtc_set_config], [CRTC:6] [FB:59] #connectors=1 (x y) (0 0)
[ 11.686371] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=1
[ 11.686373] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 11.686375] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 11.686376] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 11.686380] [drm:ironlake_update_plane], Writing base 011BF000 00000000 0 0 6656
[ 11.699556] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 11.702766] [drm:drm_mode_setcrtc], [CRTC:8]
[ 11.702771] [drm:drm_mode_setcrtc], [CONNECTOR:36:DP-4]
[ 11.702773] [drm:intel_crtc_set_config], [CRTC:8] [FB:59] #connectors=1 (x y) (0 0)
[ 11.702777] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:8], mode_changed=0, fb_changed=1
[ 11.702779] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 11.702806] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 11.702807] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 11.702813] [drm:ironlake_update_plane], Writing base 011BF000 00000000 0 0 6656
[ 11.705036] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0
[ 11.788012] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.874174] init: plymouth-upstart-bridge main process ended, respawning
[ 11.879871] init: plymouth-upstart-bridge main process (1614) terminated with status 1
[ 11.879886] init: plymouth-upstart-bridge main process ended, respawning
[ 12.158022] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 12.158027] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1]
[ 12.158029] [drm:intel_dp_detect], [CONNECTOR:13:eDP-1]
[ 12.158037] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 12.158039] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1] probed modes :
[ 12.158042] [drm:drm_mode_debug_printmodeline], Modeline 14:"1600x900" 60 112600 1600 1664 1706 1954 900 903 906 960 0x48 0xa
[ 12.158044] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 12.158147] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[ 12.158149] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1]
[ 12.158151] [drm:intel_crt_detect], [CONNECTOR:10:VGA-1] force=1
[ 12.158159] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 12.158161] [drm:intel_crt_detect], CRT not detected via hotplug
[ 12.158332] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 12.158334] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 12.158334] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 12.158336] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 12.158866] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 12.158867] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 12.158868] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 12.158870] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1] disconnected
[ 12.158873] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 12.158875] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 12.158876] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[ 12.158884] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 12.158886] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 12.158888] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1]
[ 12.158889] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-1]
[ 12.174763] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 12.174768] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1] disconnected
[ 12.174783] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 12.174785] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 12.174787] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[ 12.174788] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 12.174790] [drm:drm_mode_getconnector], [CONNECTOR:31:?]
[ 12.174792] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2]
[ 12.174793] [drm:intel_hdmi_detect], [CONNECTOR:31:HDMI-A-2]
[ 12.175005] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 12.175008] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 12.175009] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2] disconnected
[ 12.175014] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 12.175016] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:34:DP-3]
[ 12.175951] set resolution quirk: cval->res = 384
[ 12.176139] usbcore: registered new interface driver snd-usb-audio
[ 12.177582] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.177615] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.179280] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.181689] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.183448] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.183450] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.185976] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.186189] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.187424] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.189886] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.192666] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.192670] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.195215] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.195249] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.196656] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.199084] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.201043] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.201047] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.204077] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.204093] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.205331] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.207797] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.209521] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.209525] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.212050] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.212068] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.213312] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.215740] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.215758] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:34:DP-3] probed modes :
[ 12.215761] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 12.215764] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 12.215767] [drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 12.215769] [drm:drm_mode_debug_printmodeline], Modeline 43:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[ 12.215771] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[ 12.215788] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 12.215808] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 12.215810] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:36:DP-4]
[ 12.217502] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.217505] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.219380] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.219426] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.220681] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.223632] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.223635] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.225318] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.225329] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.226542] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.231704] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.231915] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.231916] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.231926] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.233139] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.238308] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.238526] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.238528] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.238538] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.239755] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.243485] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 12.243493] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:36:DP-4] probed modes :
[ 12.243497] [drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 12.243500] [drm:drm_mode_debug_printmodeline], Modeline 60:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 12.243503] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 12.243506] [drm:drm_mode_debug_printmodeline], Modeline 53:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 12.243509] [drm:drm_mode_debug_printmodeline], Modeline 54:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 12.243512] [drm:drm_mode_debug_printmodeline], Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 12.243515] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 12.243518] [drm:drm_mode_debug_printmodeline], Modeline 49:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 12.243520] [drm:drm_mode_debug_printmodeline], Modeline 50:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 12.243535] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 12.243733] [drm:drm_mode_getconnector], [CONNECTOR:38:?]
[ 12.243735] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5]
[ 12.243738] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5] disconnected
[ 12.246711] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 12.246715] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1]
[ 12.246718] [drm:intel_dp_detect], [CONNECTOR:13:eDP-1]
[ 12.246727] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 12.246729] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1] probed modes :
[ 12.246733] [drm:drm_mode_debug_printmodeline], Modeline 14:"1600x900" 60 112600 1600 1664 1706 1954 900 903 906 960 0x48 0xa
[ 12.246735] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 12.246867] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[ 12.246869] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1]
[ 12.246871] [drm:intel_crt_detect], [CONNECTOR:10:VGA-1] force=1
[ 12.246879] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 12.246881] [drm:intel_crt_detect], CRT not detected via hotplug
[ 12.247051] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 12.247054] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 12.247056] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 12.247058] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 12.247577] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 12.247579] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 12.247580] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 12.247582] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1] disconnected
[ 12.247589] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 12.247591] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 12.247593] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[ 12.247601] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 12.247603] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 12.247605] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1]
[ 12.247607] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-1]
[ 12.247680] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.247683] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.262881] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 12.262883] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1] disconnected
[ 12.262889] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 12.262890] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 12.262891] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[ 12.262892] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 12.262894] [drm:drm_mode_getconnector], [CONNECTOR:31:?]
[ 12.262895] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2]
[ 12.262896] [drm:intel_hdmi_detect], [CONNECTOR:31:HDMI-A-2]
[ 12.263144] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 12.263148] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 12.263151] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2] disconnected
[ 12.263162] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 12.263164] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:34:DP-3]
[ 12.265724] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.265741] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.266988] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.269375] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.271068] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.271070] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.273608] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.273619] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.274836] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.277229] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.278921] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.278922] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.281460] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.281471] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.282681] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.285065] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.286752] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.286754] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.289293] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.289307] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.290519] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.292902] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.294590] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.294591] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.297122] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.297135] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.298347] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.300731] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.300744] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:34:DP-3] probed modes :
[ 12.300747] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 12.300750] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 12.300753] [drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 12.300755] [drm:drm_mode_debug_printmodeline], Modeline 43:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[ 12.300757] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[ 12.300766] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 12.300784] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 12.300786] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:36:DP-4]
[ 12.302417] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.302418] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.303684] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.303696] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.304908] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.307823] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.307824] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.309510] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.309521] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.310741] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.315893] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.316101] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.316103] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.316112] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.317322] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.322473] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.322686] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.322687] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.322698] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.323910] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.327616] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 12.327621] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:36:DP-4] probed modes :
[ 12.327624] [drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 12.327626] [drm:drm_mode_debug_printmodeline], Modeline 60:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 12.327629] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 12.327631] [drm:drm_mode_debug_printmodeline], Modeline 53:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 12.327634] [drm:drm_mode_debug_printmodeline], Modeline 54:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 12.327636] [drm:drm_mode_debug_printmodeline], Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 12.327638] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 12.327641] [drm:drm_mode_debug_printmodeline], Modeline 49:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 12.327643] [drm:drm_mode_debug_printmodeline], Modeline 50:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 12.327649] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 12.327669] [drm:drm_mode_getconnector], [CONNECTOR:38:?]
[ 12.327671] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5]
[ 12.327673] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5] disconnected
[ 12.329319] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.329322] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.332609] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 12.332614] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1]
[ 12.332617] [drm:intel_dp_detect], [CONNECTOR:13:eDP-1]
[ 12.332628] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 12.332631] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1] probed modes :
[ 12.332634] [drm:drm_mode_debug_printmodeline], Modeline 14:"1600x900" 60 112600 1600 1664 1706 1954 900 903 906 960 0x48 0xa
[ 12.332637] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 12.332764] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[ 12.332767] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1]
[ 12.332769] [drm:intel_crt_detect], [CONNECTOR:10:VGA-1] force=1
[ 12.332777] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 12.332778] [drm:intel_crt_detect], CRT not detected via hotplug
[ 12.332952] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 12.332956] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 12.332958] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 12.332959] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 12.333466] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 12.333468] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 12.333469] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 12.333471] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1] disconnected
[ 12.333476] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 12.333478] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 12.333479] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[ 12.333482] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 12.333483] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 12.333485] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1]
[ 12.333486] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-1]
[ 12.346969] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 12.346975] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1] disconnected
[ 12.346994] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 12.346997] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 12.346999] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[ 12.347001] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 12.347004] [drm:drm_mode_getconnector], [CONNECTOR:31:?]
[ 12.347007] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2]
[ 12.347009] [drm:intel_hdmi_detect], [CONNECTOR:31:HDMI-A-2]
[ 12.347189] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 12.347191] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 12.347193] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2] disconnected
[ 12.347201] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 12.347203] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:34:DP-3]
[ 12.349750] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.349762] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.350979] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.353383] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.355076] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.355078] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.357619] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.357628] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.358847] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.361240] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.362935] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.362937] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.365482] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.365501] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.366721] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.369111] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.370799] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.370801] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.373340] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.373354] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.374572] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.376963] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.378649] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.378651] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.381192] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.381205] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.382417] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.384808] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.384823] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:34:DP-3] probed modes :
[ 12.384828] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 12.384830] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 12.384833] [drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 12.384835] [drm:drm_mode_debug_printmodeline], Modeline 43:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[ 12.384838] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[ 12.384851] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 12.384873] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 12.384875] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:36:DP-4]
[ 12.386497] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.386498] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.387763] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.387777] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.388988] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.391900] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.391902] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.393589] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.393600] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.394810] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.399955] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.400170] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.400172] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.400181] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.401392] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.406536] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.406753] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.406754] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.406763] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.407979] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.411662] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 12.411667] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:36:DP-4] probed modes :
[ 12.411670] [drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 12.411673] [drm:drm_mode_debug_printmodeline], Modeline 60:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 12.411675] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 12.411678] [drm:drm_mode_debug_printmodeline], Modeline 53:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 12.411680] [drm:drm_mode_debug_printmodeline], Modeline 54:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 12.411682] [drm:drm_mode_debug_printmodeline], Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 12.411685] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 12.411687] [drm:drm_mode_debug_printmodeline], Modeline 49:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 12.411690] [drm:drm_mode_debug_printmodeline], Modeline 50:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 12.411696] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 12.411716] [drm:drm_mode_getconnector], [CONNECTOR:38:?]
[ 12.411718] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5]
[ 12.411720] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5] disconnected
[ 12.413351] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.413354] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.473937] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 12.473943] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1]
[ 12.473946] [drm:intel_dp_detect], [CONNECTOR:13:eDP-1]
[ 12.473956] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 12.473959] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1] probed modes :
[ 12.473962] [drm:drm_mode_debug_printmodeline], Modeline 14:"1600x900" 60 112600 1600 1664 1706 1954 900 903 906 960 0x48 0xa
[ 12.473966] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 12.474082] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[ 12.474084] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1]
[ 12.474086] [drm:intel_crt_detect], [CONNECTOR:10:VGA-1] force=1
[ 12.474094] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 12.474096] [drm:intel_crt_detect], CRT not detected via hotplug
[ 12.474276] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 12.474279] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 12.474282] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 12.474284] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 12.474802] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 12.474804] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 12.474806] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 12.474808] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1] disconnected
[ 12.474815] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 12.474817] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 12.474819] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[ 12.474827] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 12.474830] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 12.474832] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1]
[ 12.474834] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-1]
[ 12.487113] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 12.487119] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1] disconnected
[ 12.487137] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 12.487140] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 12.487143] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[ 12.487145] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 12.487149] [drm:drm_mode_getconnector], [CONNECTOR:31:?]
[ 12.487151] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2]
[ 12.487153] [drm:intel_hdmi_detect], [CONNECTOR:31:HDMI-A-2]
[ 12.487332] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 12.487335] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 12.487337] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2] disconnected
[ 12.487345] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 12.487347] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:34:DP-3]
[ 12.489886] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.489917] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.491137] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.493525] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.495227] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.495231] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.497760] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.497772] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.498988] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.501371] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.503060] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.503061] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.505591] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.505605] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.506821] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.509213] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.510902] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.510903] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.513442] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.513455] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.514674] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.517092] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.518775] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.518776] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.521315] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.521335] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.522548] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.524952] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.524967] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:34:DP-3] probed modes :
[ 12.524970] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 12.524973] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 12.524975] [drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 12.524978] [drm:drm_mode_debug_printmodeline], Modeline 43:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[ 12.524980] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[ 12.524992] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 12.525014] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 12.525016] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:36:DP-4]
[ 12.526645] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.526647] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.527919] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.527933] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.529147] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.532063] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.532065] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.533743] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.533753] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.534963] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.540120] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.540329] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.540330] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.540340] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.541552] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.546717] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.546944] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.546946] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.546955] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.548170] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.551859] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 12.551864] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:36:DP-4] probed modes :
[ 12.551867] [drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 12.551869] [drm:drm_mode_debug_printmodeline], Modeline 60:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 12.551872] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 12.551874] [drm:drm_mode_debug_printmodeline], Modeline 53:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 12.551877] [drm:drm_mode_debug_printmodeline], Modeline 54:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 12.551879] [drm:drm_mode_debug_printmodeline], Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 12.551881] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 12.551884] [drm:drm_mode_debug_printmodeline], Modeline 49:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 12.551886] [drm:drm_mode_debug_printmodeline], Modeline 50:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 12.551892] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 12.551910] [drm:drm_mode_getconnector], [CONNECTOR:38:?]
[ 12.551912] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5]
[ 12.551914] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5] disconnected
[ 12.553590] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.553594] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.557103] [drm:intel_crtc_cursor_set], cursor off
[ 12.557111] [drm:intel_crtc_cursor_set], cursor off
[ 12.557115] [drm:intel_crtc_cursor_set], cursor off
[ 12.560356] [drm:drm_mode_addfb], [FB:56]
[ 12.560575] [drm:drm_mode_setcrtc], [CRTC:4]
[ 12.560580] [drm:drm_mode_setcrtc], [CONNECTOR:13:eDP-1]
[ 12.560582] [drm:intel_crtc_set_config], [CRTC:4] [FB:56] #connectors=1 (x y) (0 0)
[ 12.560586] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=1
[ 12.560588] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 12.560590] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 12.560592] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 12.563575] [drm:ironlake_update_plane], Writing base 0177C000 00000000 0 0 14848
[ 12.571347] [drm:drm_mode_setcrtc], [CRTC:6]
[ 12.571353] [drm:drm_mode_setcrtc], [CONNECTOR:34:DP-3]
[ 12.571356] [drm:intel_crtc_set_config], [CRTC:6] [FB:56] #connectors=1 (x y) (0 0)
[ 12.571360] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=1
[ 12.571363] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 12.571365] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 12.571366] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 12.571373] [drm:ironlake_update_plane], Writing base 0177C000 00000000 0 0 14848
[ 12.587538] [drm:drm_mode_setcrtc], [CRTC:8]
[ 12.587544] [drm:drm_mode_setcrtc], [CONNECTOR:36:DP-4]
[ 12.587547] [drm:intel_crtc_set_config], [CRTC:8] [FB:56] #connectors=1 (x y) (0 0)
[ 12.587551] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:8], mode_changed=0, fb_changed=1
[ 12.587553] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 12.587555] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 12.587557] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 12.587563] [drm:ironlake_update_plane], Writing base 0177C000 00000000 0 0 14848
[ 12.595735] [drm:intel_crtc_cursor_set], cursor off
[ 12.595741] [drm:drm_mode_setcrtc], [CRTC:6]
[ 12.595745] [drm:drm_mode_setcrtc], [CONNECTOR:34:DP-3]
[ 12.595746] [drm:intel_crtc_set_config], [CRTC:6] [FB:56] #connectors=1 (x y) (1600 0)
[ 12.595749] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:6], mode_changed=0, fb_changed=1
[ 12.595751] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 12.595753] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 12.595754] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 12.596682] [drm:ironlake_update_plane], Writing base 0177C000 FFFFFFFFFFFF5900 64 0 14848
[ 12.598699] [drm:intel_crtc_cursor_set], cursor off
[ 12.598706] [drm:drm_mode_setcrtc], [CRTC:8]
[ 12.598709] [drm:drm_mode_setcrtc], [CONNECTOR:36:DP-4]
[ 12.598711] [drm:intel_crtc_set_config], [CRTC:8] [FB:56] #connectors=1 (x y) (2624 0)
[ 12.598714] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:8], mode_changed=0, fb_changed=1
[ 12.598716] [drm:intel_modeset_stage_output_state], [CONNECTOR:13:eDP-1] to [CRTC:4]
[ 12.598717] [drm:intel_modeset_stage_output_state], [CONNECTOR:34:DP-3] to [CRTC:6]
[ 12.598718] [drm:intel_modeset_stage_output_state], [CONNECTOR:36:DP-4] to [CRTC:8]
[ 12.598723] [drm:ironlake_update_plane], Writing base 0177C000 FFFFFFFFFFFEE900 64 0 14848
[ 12.716844] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 12.716850] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1]
[ 12.716853] [drm:intel_dp_detect], [CONNECTOR:13:eDP-1]
[ 12.716864] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 12.716867] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:eDP-1] probed modes :
[ 12.716871] [drm:drm_mode_debug_printmodeline], Modeline 14:"1600x900" 60 112600 1600 1664 1706 1954 900 903 906 960 0x48 0xa
[ 12.716874] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 12.717001] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[ 12.717004] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1]
[ 12.717006] [drm:intel_crt_detect], [CONNECTOR:10:VGA-1] force=1
[ 12.717014] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 12.717016] [drm:intel_crt_detect], CRT not detected via hotplug
[ 12.717186] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 12.717189] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 12.717191] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 12.717193] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 12.717725] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 12.717728] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 12.717729] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 12.717731] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:VGA-1] disconnected
[ 12.717738] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 12.717740] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 12.717742] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[ 12.717751] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 12.717754] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 12.717756] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1]
[ 12.717758] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-1]
[ 12.731473] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 12.731481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1] disconnected
[ 12.731506] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 12.731509] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 12.731512] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[ 12.731514] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 12.731517] [drm:drm_mode_getconnector], [CONNECTOR:31:?]
[ 12.731519] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2]
[ 12.731520] [drm:intel_hdmi_detect], [CONNECTOR:31:HDMI-A-2]
[ 12.732798] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 12.732803] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 12.732806] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:31:HDMI-A-2] disconnected
[ 12.732830] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 12.732832] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:34:DP-3]
[ 12.735370] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.735386] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.736624] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.739044] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.740771] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.740775] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.743306] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.743324] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.744559] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.746974] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.748755] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.748760] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.751291] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.751425] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.752676] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.755720] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.757461] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.757465] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.759996] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.760013] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.761252] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.763708] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.765438] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.765442] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.769998] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.770021] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.771261] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.774206] [drm:drm_dp_mst_handle_down_rep], Got NAK reply: req 0x22, reason 0x09, nak data 0x03
[ 12.774230] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:34:DP-3] probed modes :
[ 12.774234] [drm:drm_mode_debug_printmodeline], Modeline 44:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 12.774236] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 12.774239] [drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 12.774241] [drm:drm_mode_debug_printmodeline], Modeline 43:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[ 12.774244] [drm:drm_mode_debug_printmodeline], Modeline 40:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[ 12.774258] [drm:drm_mode_getconnector], [CONNECTOR:34:?]
[ 12.774283] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 12.774285] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:36:DP-4]
[ 12.775938] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.775943] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.777207] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.777230] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.778470] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.781501] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.781505] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.783183] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.783211] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.784445] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.789851] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.790086] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.790089] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.790102] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.791345] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.798732] [drm:intel_hpd_irq_handler], digital hpd port 2
[ 12.798972] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.798975] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.798987] [drm:intel_dp_handle_hpd_irq], got hpd irq on port 2 - short
[ 12.800226] [drm:intel_dp_check_mst_status], got esi 02 10 00
[ 12.803965] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 12.803973] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:36:DP-4] probed modes :
[ 12.803976] [drm:drm_mode_debug_printmodeline], Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 12.803979] [drm:drm_mode_debug_printmodeline], Modeline 60:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 12.803981] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 12.803984] [drm:drm_mode_debug_printmodeline], Modeline 53:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 12.803986] [drm:drm_mode_debug_printmodeline], Modeline 54:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 12.803989] [drm:drm_mode_debug_printmodeline], Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 12.803991] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 12.803993] [drm:drm_mode_debug_printmodeline], Modeline 49:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 12.803996] [drm:drm_mode_debug_printmodeline], Modeline 50:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 12.804009] [drm:drm_mode_getconnector], [CONNECTOR:36:?]
[ 12.804040] [drm:drm_mode_getconnector], [CONNECTOR:38:?]
[ 12.804042] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5]
[ 12.804044] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:38:DP-5] disconnected
[ 12.808230] [drm:intel_dp_check_mst_status], got esi2 02 00 00
[ 12.808233] [drm:intel_dp_check_mst_status], got esi 02 00 00
[ 12.821110] [drm:intel_dp_detect], [CONNECTOR:21:DP-1]
[ 12.821136] [drm:intel_dp_detect], [CONNECTOR:27:DP-2]
[ 12.821190] [drm:intel_hdmi_detect], [CONNECTOR:25:HDMI-A-1]
[ 12.835486] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 12.835532] [drm:intel_hdmi_detect], [CONNECTOR:31:HDMI-A-2]
[ 12.835732] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 12.835735] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 12.835760] [drm:intel_crt_detect], [CONNECTOR:10:VGA-1] force=1
[ 12.835768] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 12.835770] [drm:intel_crt_detect], CRT not detected via hotplug
[ 12.835960] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 12.835962] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 12.835964] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 12.835966] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 12.837621] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 12.837627] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 12.837629] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 12.837669] [drm:intel_dp_detect], [CONNECTOR:13:eDP-1]
[ 14.975793] wlan0: authenticate with 02:6f:81:f8:2b:48
[ 14.981626] wlan0: send auth to 02:6f:81:f8:2b:48 (try 1/3)
[ 14.986061] wlan0: authenticated
[ 14.986162] wlan0: waiting for beacon from 02:6f:81:f8:2b:48
[ 15.007644] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 15.007675] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.239079] wlan0: authenticate with 02:6f:81:f9:1b:20
[ 15.241320] wlan0: send auth to 02:6f:81:f9:1b:20 (try 1/3)
[ 15.242846] wlan0: authenticated
[ 15.242987] wlan0: waiting for beacon from 02:6f:81:f9:1b:20
[ 18.637528] wlan0: authenticate with 02:6f:81:f8:2b:48
[ 18.640172] wlan0: send auth to 02:6f:81:f8:2b:48 (try 1/3)
[ 18.641668] wlan0: authenticated
[ 18.641761] wlan0: waiting for beacon from 02:6f:81:f8:2b:48
[ 19.797278] wlan0: authenticate with 02:6f:81:f9:1b:20
[ 19.800042] wlan0: send auth to 02:6f:81:f9:1b:20 (try 1/3)
[ 19.804555] wlan0: authenticated
[ 19.807185] wlan0: associate with 02:6f:81:f9:1b:20 (try 1/3)
[ 19.819880] wlan0: RX AssocResp from 02:6f:81:f9:1b:20 (capab=0xc31 status=0 aid=2)
[ 19.823802] wlan0: associated
[ 19.823830] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 19.823888] cfg80211: Calling CRDA for country: DE
[ 19.826036] cfg80211: Regulatory domain changed to country: DE
[ 19.826038] cfg80211: DFS Master region: unset
[ 19.826040] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.826041] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 19.826042] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 19.826043] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 19.826044] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 19.826045] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 21.358925] [drm:asle_set_backlight], bclp = 0x800000ff
[ 21.358929] [drm:asle_set_backlight], updating opregion backlight 255/255
[ 21.358932] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
[ 21.358936] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 21.588396] [drm:asle_set_backlight], bclp = 0x800000ff
[ 21.588400] [drm:asle_set_backlight], updating opregion backlight 255/255
[ 21.588403] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
[ 21.588406] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 21.809865] [drm:asle_set_backlight], bclp = 0x800000ff
[ 21.809870] [drm:asle_set_backlight], updating opregion backlight 255/255
[ 21.809872] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
[ 21.809876] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 21.951551] [drm:asle_set_backlight], bclp = 0x800000ff
[ 21.951555] [drm:asle_set_backlight], updating opregion backlight 255/255
[ 21.951558] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
[ 21.951562] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 22.157079] [drm:asle_set_backlight], bclp = 0x800000ff
[ 22.157083] [drm:asle_set_backlight], updating opregion backlight 255/255
[ 22.157086] [drm:intel_panel_actually_set_backlight], set backlight PWM = 4335
[ 22.157090] [drm:asle_set_pwm_freq], PWM freq is not supported
[ 23.446119] [drm:intel_crtc_cursor_set], cursor off
[ 23.966691] [drm:intel_crtc_cursor_set], cursor off
[ 24.295054] [drm:intel_crtc_cursor_set], cursor off
[ 24.423198] [drm:intel_crtc_cursor_set], cursor off
[ 25.103942] [drm:intel_crtc_cursor_set], cursor off
[ 27.002033] [drm:intel_crtc_cursor_set], cursor off
[ 34.011749] [drm:intel_crtc_cursor_set], cursor off
[ 38.630816] [drm:intel_crtc_cursor_set], cursor off
[ 42.859464] [drm:intel_crtc_cursor_set], cursor off
[ 43.003624] [drm:intel_crtc_cursor_set], cursor off
[ 44.052780] [drm:intel_crtc_cursor_set], cursor off
[ 44.541314] [drm:intel_crtc_cursor_set], cursor off
[ 45.078286] [drm:intel_crtc_cursor_set], cursor off
[ 46.841155] [drm:intel_crtc_cursor_set], cursor off
